Instructions for replacing the optical drive

904514-121 3
Replacing the optical drive
1. You must attach the release latch before installing the
new optical drive. Carefully align the holes on the
release latch with the pins on the side of the optical
drive. Press the entire release latch firmly to fasten the
latch securely to the optical drive.
2. Slide the optical drive through the front bezel until it
locks in place.
3. Connect the power and data cables to the rear of
the drive.
4. Position the access panel on the computer, and then
slide it into place (1). Tighten the screw on the rear of
the cover (2).