HP ZBook Studio G3 Mobile Workstation - Maintenance and Service Guide

Bottom cover
Description Spare part number
Bottom cover 840959-001
Before removing the bottom cover, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service door (see Service door on page 30).
Remove the bottom cover:
1. Loosen the seven captive Torx screws (1) that secure the bottom cover to the computer.
2. Lift the bottom cover o the computer (2).
Reverse this procedure to install the bottom cover.
Component replacement procedures 31