HP ZBook Studio G3 Mobile Workstation - Maintenance and Service Guide

b. Remove the display hinges (2).
The display hinges are available using spare part number 840937-001 and include the left and
right hinges.
9. (UHD models only) If it is necessary to replace the display brackets:
▲
Lift the bottom bracket (1) and top bracket (2) out of the display enclosure.
Display panel brackets are available in the Bracket Kit using spare part number 840966-001.
NOTE: The display brackets can only be removed from UHD panels.
10. If it is necessary to replace the wireless antennas:
a. Remove the cables from the routing path on the bottom-right corner of the display (1).
b. Remove the two Phillips PM2.0×2.0 screws (2) that secure the plastic holder to the bottom of the
display.
Component replacement procedures 59