HP ZBook Studio G3 Mobile Workstation - Maintenance and Service Guide

c. Peel the antennas o the display (3).
The antennas are available using spare part number 840940-001.
11. If it is necessary to replace the display cable:
a. Remove the display cable and webcam cable from the routing path along the bottom and left side
of the display enclosure (1).
b. Remove the display cable from the display enclosure (2).
The antennas are available using spare part number 840938-001.
Reverse this procedure to reassemble and install the display assembly.
60 Chapter 6 Removal and replacement procedures for authorized service provider parts