Instructions for replacing the hard drive

863072-121 4
System recovery
NOTE: If your hard drive was shipped without an operating
system (image) installed, you must reinstall the operating system
using the system recovery discs. To install the operating system,
refer to the instructions included with your system recovery discs,
or for U.S. product support, go to
http://www.hp.com/go/contactHP.
For worldwide product support, go to
http://welcome.hp.com/country/us/en/wwcontact_us.html.
IMPORTANT:
Do not turn off the computer during the
initial setup process. Please allow the process to complete
to ensure that everything that is necessary to operate the
computer is installed properly. The system recovery process
takes approximately 3 hours. When system recovery is
complete, the computer reboots and the Windows Setup
screen is displayed.
After the setup has been completed, you must reinstall any
applications that were on the old hard drive and restore
any data that you backed up. If you need further assistance,
please call 1-800-474-6836 (1-800-HP Invent) if in the U.S.
For worldwide product support, see
http://welcome.hp.com/country/w1/en/support.html.
If your hard drive was shipped with an operating system (image)
installed, system recovery disks are not required for setup.
Turn on the computer and allow the initial startup process to
completely set up the operating system.
IMPORTANT:
Do not turn off the computer during the
initial startup process. Please allow the setup process to
complete to ensure that everything that is necessary to
operate the computer is installed properly.
After the setup has been completed, you must reinstall any
applications that were on the old hard drive and restore
any data that you backed up. If you need further assistance,
please call 1-800-474-6836 (1-800-HP Invent) if in the U.S.
For worldwide product support, see
http://welcome.hp.com/country/w1/en/support.html.