User Guide

To open the embedded web server through Wi-Fi Direct
1. On the printer control panel display, from the Home screen, touch (Wi-Fi Direct).
2. Touch ( Settings ).
3. If the display shows that Wi-Fi Direct is O , touch the toggle button next to Wi-Fi Direct to turn it on.
4. From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**- HP OiceJet 5200 series (where ** are the unique characters to identify your
printer).
Enter the Wi-Fi Direct password when prompted.
NOTE: To obtain Wi-Fi Direct password, on the printer control panel display, from the Home screen,
touch (Wi-Fi Direct).
5. In a supported web browser on your computer, type the following address: http://
192.168.223.1
.
Embedded web server cannot be opened
Check your network setup
● Make sure you are not using a phone cord or a crossover cable to connect the printer to the network.
● Make sure the network cable is securely connected to the printer.
● Make sure the network hub, switch, or router is turned on and working correctly.
Check the computer
● Make sure the computer that you are using is connected to the same network as the printer.
Check your web browser
● Make sure the web browser meets the minimum system requirements. For information about system
requirements, see Specications on page 128.
● If your web browser uses any proxy settings to connect to the Internet, try turning o these settings. For
more information, see the documentation available with your web browser.
● Make sure JavaScript and cookies are enabled in your web browser. For more information, see the
documentation available with your web browser.
94 Chapter 9 Printer management tools ENWW