HP PageWide Managed Color MFP E77650, E77660, P77940, P77950, P77960, P77440, Flow MFP E77650, E77660 - User Guide

Replace the staple cartridge in the oor standing nisher (E77650z+,
E77660z+, P77940dn+, P77950dn+, P77960dn+ models only)
NOTE: Remove all paper from the nisher output bins before separating the nisher from the printer.
1. Press the nisher release button, and then slide
the nisher away from the printer.
NOTE: When moving the nisher, you do not
need to disconnect the data cable.
2. Move the nisher to a position where the nisher
rear door is accessible, and then open the nisher
rear door.
3. Turn the green wheel to bring the staple cartridge
carriage toward you until it reaches its closest
position, push down on the staple cartridge tab,
and then slide the cartridge out of the nisher.
74 Chapter 3 Supplies, accessories, and parts ENWW