HP PageWide P779, E75160, P75250, P77440, E77650, E77660, P77940, P77950, P77960 - On-Site Installation Guide
HP A3 PageWide Staging Checklist
CARRIER Partner INFORMATION
Company name
HP A3 Device Assembler/Phone Number
Main Unit staging model #, Serial
# Device X
1 Note all visible damage on shipper’s documentation prior signing and take photos of damage and Immediately send all
documentation to staging partner and HP Command Center.
2 For staging, remove enough tape and foam padding to access the control panel, ADF, paper tray, and print head wiper.
3 Remove cardboard inside tray(s), foam padding and tape from ADF, and any shipping screws.
4 Remove during staging, but do not throw away the following: print head wiper restraints, stapler shipping lock (if
applicable), cap protecting the supply delivery system, piece of white foam protecting the ADF, and the cardboard insert
for the paper tray. These pieces need to be saved for repackaging and nal shipment.
5 Conrm the stabilization bars are accounted for (if applicable – do not throw away).
6 Conrm LPDC (can be conrmed on the front panel of the device).
7 Adjust all paper trays to 8.5 to 11 unless otherwise directed by the customer
8 Firmware upgrade (Using control panel reports menu — Conguration page, conrm upgrade DateCode)
Enter rmware date code here:
9 IMPORTANT: Do not install ink cartridges during staging. Perform staging activities listed in the Staging chapter of this
guide. Ink cartridges should only be installed at the nal customer location.
10 Report and document any error codes to staging partner (Even if they were corrected)
11 Using the control panel reports menu, conrm staging model number near top of the Conguration Page.
12 Ensure stabilizer feet on bottom of unit are retracted before moving the printer.
13 Remove nisher brackets, plastic wrap / corner board HP A3 device and pad / blanket for transit / place lock screw for
external nisher with brackets
14 IMPORTANT: Does the Order Form, Cong Page and staging model Badge information all match?
15 Send digital image of conguration pages and this checklist to staging partner at service@staging partnerdelivery.com
Staging technician or team needs to scan the checklist and send to staging partner at server@stagin
partnerdelivery.com Otherwise send information HP Command Center at MPS_A3@HP.COM
Copier Builder’s Signature: ___________________________________________________
Date: ____________________________
HP Technical Support: 888-472-2737 PIN# 94408 (staging partner use only)
✓
Driver Responsibility (Please Complete And Sign)
Unit in place
10 Chapter 2 Worksheets ENWW










