HP PageWide P779, E75160, P75250, P77440, E77650, E77660, P77940, P77950, P77960 - On-Site Installation Guide
HP A3 PageWide Installation Checklist
Customer
Site address
Building/Floor/Map ID
Installation Date
MFP staging model / MFP Serial Number(s)
NOTE: This information must be provided to the CE prior to arriving at the customer site.
Table 2-3 Digital Sending Conguration Prerequisites (provided by TM/CM/PM in Deployment Package)
# Device Responsibility X
1 Location has an active network port TM/CM/PM
2 Conrm JDI port conde duplex staging partner is set to FULL TM/CM/PM
3 administrative access to the printer TM/CM/PM
# Network setting Responsibility X
1 Device IP Address TM/CM/PM
2 Device MAC Address (obtained by HP Engineer) TM/CM/PM
3 DNS server IP address (primary / secondary) TM/CM/PM
4 DNS sux (e.g., companyname.com) TM/CM/PM
5 Domain (e.g. Americas.cpqcorp.net) TM/CM/PM
6 Hostname (if applicable) TM/CM/PM
# Scan to E-mail settings Responsibility X
1 SMTP server and server port # (e.g., smtp.mycompany.com, port 25 is
default)
TM/CM/PM
2 Conrm with the customer IT admin if SMTP server authentication is
required. Most cases it does not.
TM/CM/PM
3 Conrm with the customer IT admin if the SMTP server needs to identify the
device as a relay agent. Most cases it does not.
TM/CM/PM
4 Authentication is required for Scan to email & NW folder Customer IT
# Scan to network folder settings Responsibility X
1 Destination Name (as seen on the MFP) TM/CM/PM
2 Send to folder UNC (\\server\share) TM/CM/PM
3 admin credentials for share/folder TM/CM/PM
4 Authentication is required for Scan to email & NW folder Customer IT
12 Chapter 2 Worksheets ENWW