HP PageWide P779, E75160, P75250, P77440, E77650, E77660, P77940, P77950, P77960 - On-Site Installation Guide

Supply cartridges
NOTE: Use the original shipping materials that were set aside during unpacking.
IMPORTANT: Although not recommended if the full initialization was performed, do not tip or tilt the printer
during the repackaging and shipment process. The 26-minute initialization process leaves uid residue in the
uid collection system (accessed via the left side door). The uid will dry into a “sludge” that will be more
tolerant of tipping or tilting after about 4 hours. If the printer is tipped right after initialization (or repackaged and
then shipped on any surface except for the bottom), substantial amounts of uid could spill inside the printing
mechanism. The printer CAN be safely repacked right after the initialization process if care is taken to keep the
printer in its normal, upright position.
Remove cartridges by pushing on each supply until a “click” sound is heard and the cartridge pops out. Place the
cartridges into the corrugated supplies box as shown.
ENWW Supply cartridges 57