HP PageWide P779, E75160, P75250, P77440, E77650, E77660, P77940, P77950, P77960 - On-Site Installation Guide

5. Align the accessory stabilizer bar with the slots in the accessory chassis, and then slide the stabilizer in
toward the accessory until it stops.
NOTE: Install one stabilizer at the front of the accessory, and one at the rear of the accessory.
6. Windows: If you added an accessory before installing the printer software, it is congured during software
installation. If you added an accessory after software installation, update the software settings from the
Device Settings tab in Printer Properties to congure it.
OS X: After attaching the accessory and the rst print job is sent, the accessory should be automatically
congured. If not, open System Preferences, choose Printers & Scanners, select your printer, then click
Options & Supplies and manually congure the accessory on the Options tab.
ENWW Install accessories 73