HP Z620 Workstation Quick Specs

QuickSpecs
HP Z620 Workstation
Overview
c04111527 — DA – 14262 Worldwide — Version 42 — June 25, 2014
Page 7
Chassis Dimensions (H x
W x D)
44.45 x 17.15 x 46.48 cm (17.5 x 6.75 x 18.3 in)
Rack utilization: 4U
System Weight
Actual weight depends upon configuration
Minimum config: 15.5 kg (34.2 lb)
Typical config: 17.9 kg (39.4 lb)
Maximum config: 22.6 kg (49.9 lb)
Temperature
Operating:
5° to 35° C (40° to 95° F)
Non-operating
-40° to 60° C (-40° to 140° F)
Humidity
Operating:
8% to 85% relative humidity, non-condensing
Non-operating
8% to 90% relative humidity, non-condensing
Maximum Altitude (non-
pressurized)
Operating:
3,048m (10,000ft)
Non-operating
9,144m (30,000ft)
Power Supply
Tool-free 800W 90% Efficient wide-ranging, active Power Factor Correction
The Power Supply Efficiency Report for this product may be found at this link: TBD
Interfaces Supported
10-channel SATA Interface (2 @ 6.0 Gb/s and 8 @ 3.0 Gb/s). 6 channels are eSATA configurable (2 @ 6
Gb/s, 4 @ 3 Gb/s) for use with eSATA CTO/AMO Kit. No hot plug / hot swap supported.
Hard Drive Controllers
Supported
SATA and SAS controllers
Backup Devices
For a complete listing of compatible DAT tape drives, LTO tape drives and RDX Removable Disk Backup
System offerings, please visit http://www.hp.com/go/connect
Workstation ISV
Certifications
See the latest list of certifications at
http://www.hp.com/united-states/campaigns/workstations/partnerships.html