Memory Module Replacement Instructions

852270-001 2
2. Using caution, lay the computer down on a flat surface
covered with a soft cloth.
3. To remove the stand, loosen the two captive screws in
the bottom of the stand, and then remove the stand
from the computer.
4. To remove the rear cover, remove the Phillips screw
located at the bottom of the cover
5. Starting with the gap at the top of the cover, pry the
top (1), left edge (2), and right edge (3) of the cover
away from the display assembly in the order shown.
6. To avoid damaging the cable that connects the system
board to the rear cover, carefully lift the bottom edge of
the cover, and then rotate the cover until it rests upside
down next to the display assembly.
7. Locate the memory modules:
Hard drive (1)
Memory modules (2)
Optical drive (3)