Hard Drive Replacement Instructions

854126-001 3
Replacing the hard drive
1. Insert the hard drive into the drive cage and align the
screw holes in the drive with the holes in the cage (1).
Replace the four Phillips screws (2).
2. Insert the drive cage into the computer (1), and then
connect the power and data cables to the back of the
hard drive (2).
3. Replace the three Phillips screws that secure the drive
cage to the front of the computer and the Phillips screw
that secures the drive cage to the inside of the computer.
4. Replace the bezel by inserting the tabs at the bottom of
the bezel into the slots in the front of the computer (1),
and then rotating the bezel upward and snapping it
into place (2).