Memory Module Replacement Instructions

854124-001 3

Replacing the memory module

1. Open both latches of the memory module socket (1),

and then insert the memory module into the socket (2).

Push the module down into the socket, ensuring that the

module is fully inserted and properly seated. Make sure

the latches are in the closed position (3).

NOTE: Memory modules are notched to prevent

incorrect insertion.

2. Position the access panel on the computer and slide it

into place (1). Tighten the captive screw in the rear of

the cover (2).

3. Plug the power cord and any additional cables into the

back of the computer.

4. Press the power button to turn on the computer.

The information contained herein is subject to change without notice. The only warranties for

HP products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty.

HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: March 2016

PRI NTER: Repl ac e thi s bo x with Pr inted- I n (PI )

St at em ent(s) as p er sp ec.

NOTE: This box is simply a placeholder. PI

St at em ent(s) do n ot ha ve to fit ins id e the b ox

but sh ould be pl aced in thi s area .