Hard Drive Replacement Instructions

854254-001 3
Replacing the hard drive
1. Align the screw holes in the hard drive with the holes in
the drive cage, and then replace the four Phillips
screws.
2. Position the drive cage perpendicular to the computer
and insert the cage into the slots in the computer.
Rotate the cage into place (1), and then slide the cage
toward the front of the computer (2). Replace the three
Phillips screws (3).
3. Connect the power and data cables to the back of the
hard drive.
4. Position the access panel on the computer and slide it
into place (1). Tighten the captive screw in the rear of
the cover (2).
5. Plug the power cord and any additional cables into the
back of the computer.
6. Press the power button to turn on the computer.