Optical Drive Replacement Instructions

854253-001 3

Replacing the optical drive

1. Slide the optical drive through the front bezel all the

way into the bay so that it locks into place (1), and then

connect the power and data connector to the rear of the

drive (2).

2. Position the access panel on the computer and slide it

into place (1). Tighten the captive screw in the rear of

the cover (2).

3. Plug the power cord and any additional cables into the

back of the computer.

4. Press the power button to turn on the computer.

The information contained herein is subject to change without notice. The only warranties for

HP products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty.

HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: March 2016

PRI NTER: Repl ac e thi s bo x with Pr int ed- I n (PI )

St at ement(s) as p er sp ec.

NOTE: This box is simply a placeholder. PI

St at ement(s) do n ot ha ve to fit ins id e the b ox

but sh ould be pl aced in t hi s area .