HP EliteBook Folio 1030 G1 Notebook PC - Maintenance and Service Guide

Speaker assembly
Description Spare part number
Speaker assembly (includes cable) 837352-001
Before removing the speaker assembly, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 24).
5. Remove the battery (see Battery on page 43).
6. Remove the system board (see System board on page 48).
Remove the speaker assembly:
1. Remove the three Phillips PM2.0×3.0 screws (1) that secure the speaker to the computer.
2. Remove the speaker (2) from the computer.
Reverse this procedure to install the speaker.
Component replacement procedures 51