QuickSpecs HPE Line Interactive Single Phase UPS Overview and Models HPE Line Interactive Single Phase Uninterruptible Power Systems (UPS) Looking for cost-effective power protection for your small office environments? HPE Line Interactive Single Phase Uninterruptible Power System (UPS) solutions range from tower-based systems designed to safeguard tower servers and small office equipment, to rack-based systems that can protect a full rack of servers.
QuickSpecs HPE Line Interactive Single Phase UPS Overview and Models R7000 UPS Models HPE R7000 4U 50A High Voltage NA/JP Uninterruptible Power System HPE R7000 4U IEC-32A High Voltage INTL Uninterruptible Power System AF462A AF463A Page 2
QuickSpecs HPE Line Interactive Single Phase UPS Tower UPS Features Tower UPS Rear Panel HPE T750 G4 UPS INTL 1. USB Communication Port 2. RS-232 Communication Port 3. Outlets for Connection of Critical Equipment HPE T750 G4 UPS NA/JPN 1. USB Communication Port 2. RS-232 Communication Port 3. Outlets for Connection of Critical Equipment HPE T1000 G4 UPS INTL HPE T1500 G4 UPS INTL 4. Socket for Connection to AC Power Source 5. Ground Screw HPE T1000 G4 UPS NA/JPN HPE T1500 G4 UPS NA/JPN 4.
QuickSpecs HPE Line Interactive Single Phase UPS Tower UPS Specifications Towers G4 UPS Specifications Battery Type Electrical Input Electrical Output Battery Communications Environmental and Safety 12 V, sealed, maintenance-free, rechargeable, valve regulated lead-acid batteries with a 3-5 year service life at 25C (77F). ± 20% for nominal voltages of 100, 110, 120, 220, 230, and Voltage Range 240VAC. NOTE: Nominal voltages to coincide with standard power ranges.
QuickSpecs HPE Line Interactive Single Phase UPS Tower UPS Specifications T750 G4, INTL J2P88A Unit Weight Shipping Weight 23.6 lbs (10.7kg) 26.4 lbs (12 kg) HPE T1000 G4 UPS Specifications T1000 G4, NA/JP J2P86A T1000 G4, INTL J2P89A Load Segments Unit Dimensions (WxDxH) Shipping Dimensions(LxWxH) Unit Weight Shipping Weight 1 5.9 x 13.4x 8.3 inch (150 x 340x 210 mm) 18.7 x 9.4 x 12.1 inch (476 x 238 x 308 mm) 25.1 lbs (11.4kg) 28.
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications Front panel 1 1 2 3 4 5 6 7 Battery compartment 2 Control buttons and LED display NA/JPN/TWN rear panel Load segment 1 (one NEMA 5-15 output receptacle for 8 USB communications port surge and battery backup protection) Load segment 2 (one NEMA 5-15 output receptacle for 9 REPO port surge and battery backup protection) Load segment 3 (one NEMA 5-15 output receptacle for 10 Voltage configuration and charge rate DIP swit
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications Front Panel 1 1 2 3 4 5 6 Battery compartment 2 Control buttons and LED display NA/JPN rear panel UPS option card 7 Load segment 2 (two NEMA 5-20R T-slot receptacles) USB communications port 8 PDU output (NEMA L5-30R) receptacle (load segment 1) Serial communications port 9 Cord retention clip attachment location Load segment circuit breaker 10 Cord retention clip attachment location Load segment 1 (two NEMA 5-20R T-sl
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications • • Support for Remote Emergency Power Off (REPO) circuitry Easy serviceability through modular design Specifications R/T2200 G4 UPS (NA/JPN only) Battery Type Electrical Input Electrical Output Battery Communications Environmental and Safety Unit Dimensions (LxWxH) Shipping Dimensions(LxWxH) Unit Weight Shipping Weight 12 V, 34W, sealed, maintenance-free, rechargeable, valve regulated lead-acid batteries with a 3-5
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications Battery Type Electrical Input Electrical Output Battery Communications Environmental and Safety Unit Dimensions (LxWxH) Shipping Dimensions(LxWxH) Unit Weight Shipping Weight 12 V, 34W, sealed, maintenance-free, rechargeable, valve regulated lead-acid batteries with a 3-5 year service life at 25C (77F).
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications 1. IUSB Communication Port 2. ES-232 Communication Port 3. Slot for optional communication card 6a. Group 1: programmable outlets for equipment connection 6b. Group 2: programmable outlets for equipment connection 7. Attached 6ft input power cord Nema 5-15P for AC power source, 4. Connector for ROO(Remote On/Off) or RPO (Remote Power 8. LED indicating site wiring fault alarm Off) Control 5.
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications Front View Rear View 1. 2. Escape Button Scroll up button 1. 2. 3. Scroll down button 3. 4. 5. Enter/Select button Power button 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications 1. Escape Button 1. 2. Scroll up button 2. 3. Scroll down button 3. 4. 5. Enter/Select button Power button 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications Storage Temperature Humidity (Operation) Humidity (Non-operating) Operating Altitude Audible Noise Safety Markings Safety Certifications Unit Dimensions (LxWxH) Shipping Dimensions Unit Weight Shipping Weight -15° to 55° F (-26° to 13° C) (without battery) 0% to 90% 0% to 90% up to 2000 meters <40db (at 1m from surface of unit) <45dBA while on inverter UL/cUL CE, TUV, C-tick, CES, EAC, VCCI, GS, KC, EK, BSMI UL1778; UL609
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications Communications Environmental and Safety Unit Dimensions (HxWxD) Shipping Dimensions Unit Weight Shipping Weight Recharge Time Battery String Voltage Battery Type Battery Quantity LED Indicators <3 hours to 80% usable capacity; <48 hours for complete recharge 216V 12V 27W 18 LED and switch membrane integrated into the front panel with fourbutton control (three buttons for UPS power control and one button under the front
QuickSpecs HPE Line Interactive Single Phase UPS HPE Rack/Tower UPS specifications Transit Temperature Operating Humidity Storage Humidity Operating Altitude Transit Altitude Audible Noise Safety Markings Unit Dimensions (HxWxD) Shipping Dimensions (H x L x W) Unit Weight Shipping Weight -13° to 131° F (-25° to 55° C) 20% to 80% (non-condensing) 5% to 95% Up to 6,562 ft (2000 m) above sea level 49,212 ft (15,000 m) above sea level <46db in normal operation(at 1m from surface of unit) NA/JPN: UL, cUL Int
QuickSpecs HPE Line Interactive Single Phase UPS Related Options UPS Network Module The HPE UPS Network Module enables you to monitor and manage power environments through comprehensive control of HPE UPSs. The HPE UPS Management Module can support either a single UPS configuration or provide additional power protection with support for dual redundant UPS configuration for no-single-point-of-failure. The additional serial ports will provide greater power management control and flexible monitoring.
QuickSpecs HPE Line Interactive Single Phase UPS Warranty and Care Pack Warranty When you need it, use outstanding HPE support services for your whole data center environment. With HPE Care Pack Services, have the security of knowing that your HPE UPS will be covered at the same service level and coverage period as your HPE server. HPE UPSs are backed by a 3-year limited warranty, with the first year including parts and labor.
QuickSpecs HPE Line Interactive Single Phase UPS Warranty and Care Pack manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option. For more information To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant or http://www.hp.
QuickSpecs HPE Line Interactive Single Phase UPS HPE Model Matrix HPE T750 G4 UPS Model Part Number Operating Voltage Power Out (VA/Watts) Input Connection Settings 110V to 120V 750VA/525W Attached NEMA 5-15 100V- Japan 750VA/500W Plug type power cord, 16AWG 100V- Japan 750VA/500W 220V/230V/240V 750VA/525W C14 Inlet ( For detachable country specific power cord J2P85A (North America/Japan) J2P88A International model Output Connection 6 – NEMA 5-15 receptacles 6 – IEC C13 receptacles HPE T1000 G4 UPS Mo
QuickSpecs HPE Line Interactive Single Phase UPS HPE Model Matrix J2R01A LV NA/JP 120V1 to 125V 100V 2880/2700 1500/1400 J2R02A HV NA/JP 208V1 to 240V 200V 3000/2700 2490/2241 J2R04A HV INTL 208V to 240V (230V1 ) 3000/ 2700 2490/2241 200V L5-30P, 2.4m cord LS1-LS42: 6x NEMA 5-20 outlets, LS53: 1X NEMA L5-30 receptacle L6-20P, 2.
QuickSpecs HPE Line Interactive Single Phase UPS Estimated Backup Times Battery runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
QuickSpecs HPE Line Interactive Single Phase UPS Estimated Backup Times Load (Percent) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load (Watts) 109W 219W 328W 438W 547W 656W 766W 875W 985W 1094W Minutes of Back up time 97 39 23 16 12 10 8 7 6 5 Estimated Runtime with Extended Runtime Module (ERM) R/T2200 G4 UPS Load (Percent) 191W (10%) 382W (20%) 573W (30%) 764W (40%) 956W (50%) 1147W (60%) 1338W (70%) 1529W (80%) 1720W (90%) 1911W (100%) With internal batteries (Minutes) 80 30 17 12 9 7 5 4 4 3 With O
QuickSpecs HPE Line Interactive Single Phase UPS Estimated Backup Times R/T3000 G4 UPS Low Voltage Load (Percent) 270W (10%) 540W (20%) 810W (30%) 1080W (40%) 1350W (50%) 1620W (60%) 1890W (70%) 2160W (80%) 2430W (90%) 2700W (100%) With internal batteries (Minutes) 61 28 17 12 10 8 7 6 5 4 With One ERMs (Minutes) 281 127 79 57 44 36 30 26 22 20 With Two ERMs (Minutes) 475 219 140 101 79 65 54 47 41 37 With Three ERMs (Minutes) 665 311 200 146 114 93 79 68 60 53 With Four ERMs (Minutes) 860 405 260 19
QuickSpecs HPE Line Interactive Single Phase UPS Estimated Backup Times R7000 UPS NA/JP Load With internal batteries With One ERM (Minutes) With Four ERMs (Minutes) (Percent*) (Minutes) 720W (10%) 160 237 736 1440W (20%) 53 100 309 2160W (30%) 28 60 186 2880W (40%) 18 42 130 3600W (50%) 12 32 98 4320W (60%) 9 25 78 5040W (70%) 7 21 64 57600W (80%) 6 18 54 6480W (90%) 5 15 47 7200W (100%) 4 13 41 NOTE: Backup times are estimated for typical applications.
QuickSpecs HPE Line Interactive Single Phase UPS Estimated Backup Times Rack/Tower UPS Models (Minutes) With One Extended Runtime Module (Minutes) With Two Extended Runtime Modules (Minutes) With Three Extended Runtime Modules (Minutes) With Four Extended Runtime Modules (Minutes) 384W 20% 45 142 256 346 448 960W 50% 15 55 99 110 144 1536W 80% 7 34 60 53 78 1920W 100% 5 26 47 36 57 540W 20% 40 125 225 349 452 1350W 50% 12 50 99 107 140 2160W 80% 6 30 60 67 88
QuickSpecs HPE Line Interactive Single Phase UPS Estimated Backup Times Page 26
QuickSpecs HPE Line Interactive Single Phase UPS Summary of Changes Date 21-Feb-2017 26-Oct-2016 26-Sep-2016 Version History From Version 12 to 13 From Version 11 to 12 From Version 10 to 11 Action Changed Changed Changed 28-Sep-2015 From Version 9 to 10 Added Description of Change Estimated Backup Times section was updated. Version reverted. Overview and Models, Key Features, Tower UPS Compatibility, and Product Specifications were revised.
