User Manual

QuickSpecs
HPE FlexNetwork 5130 HI Switch Series
Overview
Page
1
HPE FlexNetwork 5130 HI Switch Series
Models
HPE FlexNetwork 5130 24G 4SFP+ 1-slot HI Switch
JH323A
HPE FlexNetwork 5130 48G 4SFP+ 1-slot HI Switch
JH324A
HPE FlexNetwork 5130 24G PoE+ 4SFP+ 1-slot HI Switch
JH325A
HPE FlexNetwork 5130 48G PoE+ 4SFP+ 1-slot HI Switch
JH326A
Key features
• Scalable with 10 Gigabit uplinks and 9-chassis IRF with up to 80GB/s stacking bandwidth
• PoE+ for up to 30 Watts of PoE power per port on all ports simultaneously
• 4 convenient built-in SFP+ 10GbE uplinks provide performance for bandwidth hungry applications
• Openflow 1.3 support
• MACsec support
Product overview
The HPE FlexNetwork 5130 HI Switch Series comprises Gigabit Ethernet switches that support static and RIP Layer 3 routing,
diversified services, and IPv6 forwarding, as well as provide four 10
-Gigabit Ethernet (10GbE) interfaces.
Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switch
es as one logical device,
which increases network resilience, performance, and availability, while reducing operational complexity. These switches prov
ide
Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in sma
ll data centers.
High availability, simplified management, and comprehensive security control policies are among the key features that disting
uish
this series. This switch also supports dual modular power supplies.
Features and benefits
Software-defined networking
• OpenFlow
supports OpenFlow 1.3 specification to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths
Quality of Service (QoS)
• Broadcast control
allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
• Advanced classifier-based QoS
classifies traffic using multiple match criteria based on Layers 2, 3, and 4 information; applies QoS policies such as setting
priority level and rate limit to selected traffic on a port, VLAN, or entire switch
• Powerful QoS feature
supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR