User Manual

ManualsBrandsHPE ManualsHPE NetworkingFlexNetwork 5130 24G PoE+ 4SFP+ 1-slot HI Switch

Data sheet

HPE FlexNetwork 5130 HI

Switch Series

Key features

• Scalable with 10 Gigabit uplinks and nine-chassis IRF with up to 80 Gbps stacking bandwidth

• PoE+ for up to 30 W of PoE power per port on all ports simultaneously

• Four convenient built-in SFP+ 10GbE uplinks provide performance for bandwidth hungry

applications

• OpenFlow 13 support

• MACsec support

Product overview

The HPE FlexNetwork 5130 HI Switch Series comprises Gigabit Ethernet switches that support

static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four

10 Gigabit Ethernet (10GbE) interfaces.

Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several

switches as one logical device, which increases network resilience, performance, and availability,

while reducing operational complexity. These switches provide Gigabit Ethernet access and can

be used at the edge of a network or to connect server clusters in small data centers.

High availability, simplified management, and comprehensive security control policies are among

the key features that distinguish this series. This switch also supports dual modular power supplies.

Summary of content (16 pages)

PAGE 1
Data sheet HPE FlexNetwork 5130 HI Switch Series Key features • Scalable with 10 Gigabit uplinks and nine-chassis IRF with up to 80 Gbps stacking bandwidth • PoE+ for up to 30 W of PoE power per port on all ports simultaneously • Four convenient built-in SFP+ 10GbE uplinks provide performance for bandwidth hungry applications • OpenFlow 1.
PAGE 2
Data sheet Page 2 Features and benefits Software-defined networking • OpenFlow Supports OpenFlow 1.
PAGE 3
Data sheet Page 3 • sFlow® (RFC 3176) Provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes • Management VLAN Segments traffic to and from management interfaces, including CLI/Telnet, and SNMP • Remote intelligent mirroring Mirrors ingress/egress ACL-selected traffic from a switch port
PAGE 4
Data sheet Page 4 • IEEE 802.3at Power over Ethernet (PoE+) support Simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location • Ethernet operations, administration, and maintenance (OAM) Detects data link layer problems that occurred in the “last mile” using the IEEE 802.
PAGE 5
Data sheet Page 5 • IPv6 management Future-proofs networking, as the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, and ARPv6 • Troubleshooting Allows ingress and egress port monitoring, enabling network problem solving; virtual cable tests provide visibility into cable problems Layer 2 switching • 32K MAC address table Provides access to many Layer 2 devices • VLAN support and tagging Supports IEEE 802.
PAGE 6
Data sheet Page 6 • Route maps Provide more control during route redistribution; allow filtering and altering of route metrics • DHCP server Centralizes and reduces the cost of IPv4 address management Layer 3 routing • Static IP routing Provides manually configured routing for both IPv4 and IPv6 networks • Routing Information Protocol (RIP) Uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes loop protection • Policy Based Routing Provides a
PAGE 7
Data sheet Page 7 • Port security Allows access only to specified MAC addresses, which can be learned or specified by the administrator • Port isolation Secures and adds privacy, and prevents malicious attackers from obtaining user information • STP BPDU port protection Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks • STP root guard Protects the root bridge from malicious attacks or configuration mistakes • DHCP protection Blocks DHCP packets f
PAGE 8
Data sheet Page 8 • PoE allocations Supports multiple methods (automatic, IEEE 802.
PAGE 9
Data sheet Page 9 HPE FlexNetwork 5130 HI Switch Series Specifications HPE 5130 24 G 4SFP+ HI with 1 interface slot switch (JH323A) HPE 5130 48 G 4SFP+ HI with 1 interface slot switch (JH324A) I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.
PAGE 10
Data sheet Page 10 HPE FlexNetwork 5130 HI Switch Series Specifications (continued) HPE 5130 24 G 4SFP+ HI with 1 interface slot switch (JH323A) HPE 5130 48 G 4SFP+ HI with 1 interface slot switch (JH324A) 50/60 Hz 365 BTU/hr (385.
PAGE 11
Data sheet Page 11 HPE FlexNetwork 5130 HI Switch Series Specifications (continued) HPE 5130 24 G POE+ 4SFP+ HI with 1 interface slot switch (JH325A) HPE 5130 48 G POE+ 4SFP+ HI with 1 interface slot switch (JH326A) I/O ports and slots 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.
PAGE 12
Data sheet Page 12 HPE FlexNetwork 5130 HI Switch Series Specifications (continued) HPE 5130 24 G POE+ 4SFP+ HI with 1 interface slot switch (JH325A) HPE 5130 48 G POE+ 4SFP+ HI with 1 interface slot switch (JH326A) 50/60 Hz 2217 BTU/hr (3599.66 kJ/hr), ranges from 228 BTU/hr to 3412 BTU/hr, depending on power supply configuration 100–240 VAC, rated (90–264 VAC, max) (depending on power supply chosen) 650 W 67 W 740 W PoE+ Idle power is the actual power consumption of the device with no ports connected.
PAGE 13
Data sheet Page 13 Standards and protocols (Applies to all products in series) Device management RFC 1155 Structure and Mgmt Information (SMIv1) RFC 1157 SNMPv1/v2c RFC 1305 NTPv3 RFC 2573 (SNMPv3 Applications) RFC 2578 SMIv2 RFC 2819 (RMON groups Alarm, Event, History, and Statistics only) RFC 3416 (SNMP Protocol Operations v2) RFC 3417 (SNMP Transport Mappings) HTML and Telnet management Multiple Configuration Files SNMPv3 and RMON RFC support SSHv1/ SSHv2 Secure Shell TACACS/TACACS+ General protoc
PAGE 14
Data sheet Page 14 Standards and protocols (Applies to all products in series) MIBs RFC 1157 A Simple Network Management Protocol (SNMP) RFC 1212 Concise MIB Definitions RFC 1213 MIB II RFC 1215 A Convention for Defining Traps for use with the SNMP RFC 1493 Bridge MIB RFC 1757 Remote Network Monitoring MIB RFC 2096 IP Forwarding Table MIB RFC 2233 Interface MIB RFC 2571 SNMP Framework MIB RFC 2572 SNMP-MPD MIB RFC 2573 SNMP-Notification MIB RFC 2573 SNMP-Target MIB RFC 2574 SNMP USM MIB RFC 2618 RADIUS
PAGE 15
Data sheet Page 15 HPE FlexNetwork 5130 HI Switch Series accessories (continued) Cables Aruba X2C2 RJ45 to DB9 Console Cable (JL448A) HPE 0.
PAGE 16
Data sheet Make the right purchase decision. Click here to chat with our presales specialists. Sign up for updates © Copyright 2015–2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.