Product Data Sheet / Brochure

QuickSpecs
HPE ProLiant DL385 Gen10 Plus Server
Core Options
Page 30
Hard Drive Blank Kits
HPE Large Form Factor Hard Drive Blank Kit
666986-B21
HPE Small Form Factor Hard Drive Blank Kit
666987-B21
HPE Tape Backup
For the complete range of tape drives, autoloaders, libraries and media see:
https://www.hpe.com/us/en/storage/storeever
-tape-storage.html.
For
hardware and software compatibility of Hewlett Packard Enterprise tape backup products
http://www.hpe.com/storage/BURAcompatibility
Hard Drive Kits
HPE DL38X Gen10 Plus 4LFF SAS/SATA Low Profile Mid Tray Drive Cage Kit
P14503-B21
NOTE: Supported with both the 8 and 12 LFF model.
NOTE:
With this mid-tray only single-wide (8.5-inch cards with connections or less) cards are supported.
Full
Length
PCIe cards cannot be supported.
NOTE:
This drive does support hot-swap drives.
NOTE:
This requires Max Performance Fan kit (P14608-B21 ).
NOTE:
Requires DIMM Blank kit (P07818-B21), if this option is selected with processor 200W and above.
HPE DL38X Gen10 Plus 2LFF Primary FIO Riser Kit
P14579-B21
NOTE: Supported only on 8 LFF & 12 LFF Models.
NOTE:
This option occupies primary riser slot.
HPE DL385 Gen10 Plus 2SFF NVMe/SAS Smart Carrier Riser Kit
P14505-B21
NOTE: 2SFF NVMe/SAS SC Kit (P14506-B21) and 2 SFF NVMe/SAS Riser Kit (P14505-B21) CANNOT be
selected together
NOTE:
35 degree C is the max ambient can be supported and no A3 or A4 support when putting the Shiner
Expander in Slot3 and Slot6 under the 2SFF drive cage
NOTE:
"To have the optimal drive performance, it is recommended to put NVMe drives towards the middle or
front of the server. If customer want to put NVMe drives in rear, it is recommended to have maximum NVMe
drives not to exceed one per 2SFF drive cage kit.”
NOTE:
Supports 2 SFF rear in Riser1 or 2 location – max 2 supported SFF model.
NOTE: Supports 2 SFF rear in Riser1 or 2 location in LFF model.
HPE DL385 Gen10 Plus 2SFF NVMe/SAS Smart Carrier Front/Rear Drive Cage Kit
P14506-B21
NOTE: Supports upto 2 SFF drives in 8 SFF, 12 LFF & 24 SFF Models.
NOTE:
Max Qty=2 ,allowed on 8 SFF model.
NOTE:
Only 1 drive cage can be ordered with 12 LFF and 24 SFF models.
NOTE:
8SFF Model with 2 drive cages, requires Universal Media Bay.
HPE DL385 Gen10 Plus 2SFF SAS/SATA Smart Carrier LFF Chassis Drive Cage Kit
P14507-B21
NOTE: Supported only on 8 LFF Model.
HPE DL385 Gen10 Plus 8SFF NVMe/SAS Smart Carrier Box 1-3 Drive Cage Kit
P14578-B21
NOTE: Supported only on 8 SFF Model.
NOTE:
Maximum upto 2 drive cages can be selected.
NOTE:
If Drive Cage Qty=1 is selected with one processor only, it requires the 8NVMe
Direct Support Bundle
(P22750
-B21) to be selected.
NOTE:
If Drive Cage Qty=1 is selected with two processors, it requires the 8NVMe
Direct Support Bundle
(
P19358-B21) to be selected.
NOTE: If Qty=2 is selected, it requires 16 NVMe Balanced Support Bundle (P22751-B21) to be selected
HPE DL385 Gen10 Plus 2SFF U.3 Premium Secondary Riser Kit
P25902-B21
HPE DL38X Gen10 Plus 2LFF Low Profile Secondary Riser Kit
P25903-B21
Media Bay Kits
HPE DL38X Gen10 Plus Universal Media Bay Kit
P14609-B21