ProLiant DL385 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL385 Gen10 Plus Server
Configuration Information
Page
19
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered,
Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for
information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server
HPE ProLiant DL385
Gen10 Plus 8 SFF
CTO Server
HPE ProLiant DL385
Gen10 Plus 12 LFF
CTO Server
HPE ProLiant DL385
Gen10 Plus 8LFF CTO
Server
HPE ProLiant DL385
Gen10 Plus 24 SFF
CTO Server
SKU Number
P14278-B21
P14280-B21
P14281-B21
P14279-B21
Processor
Not included as
standard
Not included as
standard
Not included as
standard
Not included as
standard
DIMM Slots
32-DIMM slots**
32-DIMM slots**
32-DIMM slots**
32-DIMM slots**
Storage Controller
Choice of HPE modular Smart Array and PCIe plug-in controller
PCIe
Three standard in primary riser, upto Eight slots with 2 processors
Drive Cage - included
8 SFF
12 LFF
8LFF
24 SFF
Network Controller
Choice of OCP or stand up card
Fans
4-Standard
6 Performance
6-Standard
6-Performance
Management
HPE iLO with Intelligent Provisioning (standard), iLO Advanced and OneView (optional)
USB
1x 3.0 standard plus
iLo front service port
1x 3.0 standard plus
iLo front service port
1x 3.0 standard plus
iLo front service port
1x 3.0 standard plus
iLo front service port
NOTE: ** 32 DIMM slots require selection of 2 processors
NOTE:
HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal Government
customers. These products are either manufactured or substantially transformed in a designated country.
TAA compliance is only
provided when HPE options are included as part of factory integrated orders (CTO).
NOTE: TAA compliant configuration requires HPE DL385 Gen10 Plus TAA FIO Enablement Kit (P14282-B21)
NOTE: All CTO servers are Energy Star 3.0 compliant.
CTO Server
8 SFF CTO Chassis
24 SFF CTO Chassis
8 LFF CTO Chassis
12 LFF CTO Chassis
Included Drive Cage
8 SFF SAS/SATA
3x 8 SFF SAS/SATA
8 LFF SAS/SATA
12 LFF Chassis
Universal Media Bay
Optional
Not available
Not available
Not available
ODD
Optional
Not available
Optional
Not available
8 SFF Drive Cage
Up to 2 Optional
Not available
Not available
Not available
8 SFF SAS/SATA/NVMe
(Mid- plane)
Not available
Not available
Not available
Not available
8 NVME/SAS Bay
Up to 2 Optional
Not available
Not available
Not available
8 NVME Cage
Up to 2 Optional
Not available
Not available
Not available
2 SFF SAS/SATA (Front)
1 Optional
Not available
1 Optional
Not available
2 SFF SAS/SATA (Rear)
1 Optional
1 Optional
1 Optional
1 Optional
2 NVMe (Front)
1 Optional
Not available
1 Optional
Not available
4 LFF Mid-plane
Not available
Not available
1 Optional
1 Optional
4 LFF Rear
Not available
Not available
1 Optional
1 Optional
NOTE: This aplies to CTO configurations, field upgrades may differ depending field configuration.