ProLiant DL385 Gen10 Plus Server

ManualsBrandsHPE ManualsHardwareProLiant DL385 Gen10 Plus rack-mountable - EPYC 7302 3 GHz - 32 GB - no HDD

Table Of Contents

QuickSpecs

HPE ProLiant DL385 Gen10 Plus Server

Configuration Information

Page

NOTE: Select one or more power supplies.

NOTE: 1600W Power supplies only support high line voltage (200VAC to 240VAC).

NOTE:

Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run

to determine the right size power supply for your server configuration. The HPE Power Advisor is located at:

http://www.hpe.com/info/hppoweradvisor.

NOTE: All power supplies in a server should match. Mixing Power Supplies is not supported.

NOTE: HPE ProLiant servers ship with an IEC-

IEC power cord used for rack mounting with Power Distribution

Units (PDUs). Visit HPE power cords for a full list of optional power cords.

Step 3: Choose Additional Factory Integratable Options

One of the following from each list may be selected if desired at time of factory integration

HPE Unique Options

HPE DL385 Gen10 Plus TAA FIO Enablement Kit

P14282-B21

NOTE: This kit enables TAA compliance. HPE offers multiple Trade Agreement Act (TAA) compliant

configurations to meet the needs of US Federal Government customers. These products are either

manufactured or substantially transformed in a designated country. TAA compliance is only provided when

HPE options are included as part of factory integrated orders (CTO)

HPE DL38X Gen10 Plus 2LFF Tertiary FIO Riser Kit

P14580-B21

NOTE: Supported only on 8 LFF & 12 LFF Models

NOTE: When this option is selected, secondary riser cannot be selected

NOTE: This option occupies tertiary riser slot

HPE DL38X Gen10 Plus x8x16x8 Primary Riser FIO Kit

P14591-B21

NOTE: Supports Full Height, Full-length cards and Full Height, Half- length cards.

NOTE: Bus width x8, x16, x8, Connector Width x8, x16, x8.

HPE DL38X Gen10 Plus x16x16 Slot1/2 Riser FIO Kit

P14592-B21

NOTE: Supports Full Height and Full length cards.

NOTE: Bus width x16, x16, Connector Width x16, x16

NOTE: Slot 1 or 2 in Primary or Secondary location

HPE DL38X Gen10 Plus x16 x16 Slot2/3 Riser FIO Kit

P14599-B21

NOTE: Slot 1 or 2 in Primary or Secondary location

NOTE: Supports Full Height and Full length cards.

NOTE: Bus width x16, x16, Connector Width x16, x16

NOTE: Requires the option HPE Gen10 Plus Slot1 x16 Adder S2/3 Rsr Kit (P14600-B21)

, to add additional

x16 PCIe Gen4 in slot 1

HPE DL38X Gen10 Plus 8NVMe Balanced FIO Support Bundle

P19358-B21

NOTE:

This is a trigger SKU having the below list of options bundled together . This bundle SKU needs to be

selected in order to support 8 NVMe Drives with two processors

• HPE DL Gen10 Plus 8NVMe CPU1/2 Cable kit (P22829-B21)

• HPE DL Gen10 Plus 8SFF x4NVMe/SAS SC Kit (P14578-B21)

• HPE DL Gen10 Plus Max Performance Fan (P14608-B21)

• Requires 2nd Processor

HPE DL385 Gen10 Plus 8NVMe Direct Support FIO Bundle

P22750-B21

NOTE:

This is a trigger SKU having the below list of options bundled together . This bundle SKU needs to be

selected in order to support 8 NVMe Drives with one processor only

• HPE DL38X Gen10 Plus 8NVMe CPU1 Cable Kit (P22834-B21)

• HPE DL38X Gen10 Plus AROC to NVMe Adapter Kit (P14602-B21)

• HPE DL385 Gen10 Plus 8SFF NVMe/SAS Box1-3 Smart Carrier Drive Cage Kit (P14578-B21)

• HPE DL38X Gen10 Plus Max Performance Fan Kit (P14608-B21)

NOTE:

This requires only one processor.