ProLiant DL385 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL385 Gen10 Plus Server
Technical Specifications
Page
41
System Inlet Temperature
Extended Ambient
Operating Temperature
For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C
(41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude
derating of 1.0°C per every
175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The
approved hardware configurations for this system are listed at the URL:
http://www.hpe.com/servers/ashrae
For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C
(104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft)
above 900 m (2953 ft) to a m
aximum of 3050 m (10,000 ft). The approved hardware configurations for
this system are listed at the URL:http://www.hpe.com/servers/ashrae
System performance may be reduced if operating in the extended
ambient operating range or with a fan
fault.
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing.
(non-condensing) Non-
operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
RTC Accuracy
50 ppm
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure
levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with I
SO
7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109)
. The listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels. Please have your HPE representative provide informa
tion
from the HPE EMESC website for further technical details regarding the configurations listed below.
Idle
LWAd
5.0 B Entry
5.2 B Base
5.7 B Perf
LpAm
32 dBA Entry
34 dBA Base
44 dBA Perf
Operating
LWAd
5.0 B Entry
5.3 B Base
6.4 B Perf
LpAm
32 dBA Entry
37 dBA Base
48 dBA Perf
NOTE: Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary depending on
system configuration. Values are subject to change without notification and are for reference only.
NOTE: Product conformance to cited pr
oduct specifications is based on sample (type) testing, evaluation, or assessment. This
product or family of products is eligible to bear the appropriate compliance logos and statements.
NOTE: The Listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels.