ProLiant DL385 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL385 Gen10 Plus Server
Standard Features
Page
8
Power Supply
• HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% Power Efficiency.
• HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94%. Power Efficiency
• HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 96% Power Efficiency
NOTE: 200-240VAC power input only.
• HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% Power Efficiency
NOTE: 277VAC power input.
• HPE 800W Flex Slot 48VDC Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% Power Efficiency
NOTE: -48VDC power input.
• HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% Power Efficiency.
NOTE: 200-240VAC power input only.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-
less
installation into HPE ProLiant Gen10 Plus Performance Servers. Flex Slot power supplies are certified for high-
efficiency operation
and offer multiple power output options, allowing users to "right-
size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-
14 jumper cord (A0K02A). This jumper cord is also included with
each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit
HPE Server power supplies.
Interfaces
Serial
Optional, rear
Display Port
1 standard on both SFF & LFF chassis, rear.
VGA Port
Optional via Universal Media Bay, P14609-B21.
Network Ports
None. Choice of OCP or stand up card
HPE iLO Remote
Management Network
Port
1 Gb Dedicated
Front iLO Service Port
1 standard (Not available on 12 LFF chassis or when SID is ordered, note iLO dongle required,
880123-B21)
USB 3.0
Up to 7 total: 1 front, 2 rear, 2 internal (secure), 2 optional USB 3.0 front via Universal Media Bay, or
standard on 8 LFF chassis
SID (Systems Insight
Display)
Optional
NOTE: Not shipping as standard. Available as a CTO option or as a field upgrade (P14611-B21).
UEFI
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).
Learn more at http://www.hpe.com/servers/uefi.