ProLiant ML110 Gen10 Server

QuickSpecs
HPE ProLiant ML110 Gen10 Server
Configuration Information
- Factory Integrated Models
Page 22
HPE ML110 Gen10 Intel® Xeon-Bronze 3106 (1.7GHz/8-core/85W) FIO Processor Kit (Recommended)
876916-L21
HPE ML110 Gen10 Intel Xeon-Bronze 3104 (1.7GHz/6-core/85W) FIO Processor Kit (Recommended)
876915-L21
Step 2b: Choose Memory Options
Please select one or more memory from below.
For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go
to: https://www.hpe.com/docs/memory-population-rules
For Gen10 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy
mirrored memory feature etc. please go to: http://www.hpe.com/docs/memory-ras-feature
NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification testing.
NOTE:
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
Memory - Recommended
HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
(Recommended)
815097-B21
HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
(Recommended)
815098-B21
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
(Recommended)
815100-B21
Step 2c: Choose Power Supplies
Select one or two power supplies from below.
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server configuration in the
HPE Power Advisor tool to determine the right size power supply for your server configuration. The HPE Power Advisor is
located at: http://www.hpe.com/info/hppoweradvisor
.
NOTE: By RPS Enablement Kit power options, mixing of power supplies in the same RPS enablement kit is
not supported. All
power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your server.
Power Supplies - Recommended
HPE ProLiant Special Power Supply (Recommended)
867876-B21
HPE ML110 Gen10 550W ATX Power Supply Kit (Recommended)
874009-B21
HPE ML110 Gen10 Redundant Power Supply Enablement Kit (Recommended)
867875-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)
865414-B21
Step 3: Choose Additional Factory Integratable Options
One of the following from each list may be selected if desired at time of factory integration
HPE Legacy FIO Mode Setting
758959-B22
NOTE: UEFI is the default, this FIO part can be used for CTO to enable Legacy mode.