ProLiant ML110 Gen10 Server

QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
Page 7
Expansion Slots
Slots #
Technology
Bus
Width
Connector Width
Slot Form Factor
Notes
5
PCIe 3.0
X4
X8
Full-height,
half-length slot
PCH
4
PCIe 3.0
X16
X16
Full-height,
full-length slot
Proc 1
3
PCIe 3.0
X8
X8
Full-height,
half-length slot
Proc 1
2
PCIe 3.0
X4
X8
Full-height,
half-length slot
Proc 1
1
PCIe 3.0
X16
X16
Full-height,
¾ length
(up to 9.5") Slot
Proc 1
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: Although the Speed of slot is designed for 32Gb/s, the actual running speed will be lower than it was designed.
Hence
Slot 2 and Slot 5 will be least recommended for usage.
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed
breakout of the available Gen10 Smart Array controllers visit the
HPE Smart Array Gen10 Controllers Data Sheet.
One of the following depending on model
Software RAID
HPE Smart Array S100i SR Gen10 SW RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional
controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled. For enabling please select HPE
FIO Enable Smart Array SW RAID (784308-B21).
NOTE: The S100i supports 10 ports as 2 additional ports are leveraged to support the M.2 option.
NOTE: For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot
volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/
Essential RAID
Controller
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID
Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P408e-p SR Gen10 Controller
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (P01367-B21-B21) which is sold separately.
Internal Storage Devices
One of the following depending on model
Optical Drive
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
NOTE: Optical is optional in BTO models.
Hard Drives
None ship standard
Hard Drive Bays
Up to 8 Non-hot plug SATA 3.5-inch drives
NOTE: Mixing drive cage types is not allowed.
NOTE: All Pre-configured Models come populated with hard drive blanks
installed. The 4LFF configurations includes 3 blanks and 8SFF includes 7
blanks. Additional hard drive blanks can be ordered using either P/N
807878-B21 for the HPE LFF HDD Blank Kit or P/N 666987-B21 for