ProLiant ML110 Gen10 Server

QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
Page 8
the HPE SFF HDD Blank Kit. These part numbers for single HDD blanks
below are also provided should you require replacement HDD blanks
for your server.
NOTE: NHP SATA is limited to S100i controller.
4 Hot plug LFF SAS/SATA HDD bays; upgradable to 8
8 Hot plug SFF SAS/SATA HDD bays; upgradable to 16
Maximum Internal Storage
CAPACITY
CONFIGURATION
Hot Plug LFF SAS
96 TB
8 x 12 TB
Hot Plug LFF SATA
96 TB
8 x 12 TB
Hot Plug SFF SAS
38.4 TB
16 x 2.4 TB
Hot Plug SFF SATA
32 TB
16 x 2 TB
Non Hot Plug LFF SATA
32 TB
8 x 4 TB
Hot Plug LFF SATA SSD
30.72 TB
8 x 3.84 TB
Hot Plug SFF SAS SSD
61.44 TB
16 x 3.84 TB
Hot Plug SFF SATA SSD
61.44 TB
16 x 3.84 TB
Power Supply
HPE ML110 Gen10 350W ATX Power Supply Kit
HPE ML110 Gen10 550W ATX Power Supply Kit
NOTE: ATX power supply will not support redundant fan option.
HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class
efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been
designed specifically for HPE ProLiant Gen10 Essential Series servers.
The HPE 550W ATX Power Supply is the standard, non-redundant AC power supply option for most HPE ProLiant Gen10
Essential servers. It features Silver-level (88%) certified power efficiency with a set of features optimized for the Gen10
Essential-series rack and tower servers.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet
connector.
NOTE: The 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit requires the RPS Enablement Kit.
NOTE:
The RPS Enablement kit will support two power supplies.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation
and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This
flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please
check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies.
Interfaces
Video
1 standard ( at system rear)
Network RJ-45
(Ethernet)
2 standard ( at system rear)
Serial
1 optional ( at system rear)