ProLiant DL360 Gen10 Server

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Overview
Page 3
Internal View - Standard for all DL360 Gen10
1.
For 8 SFF or 4 LFF - Standard single rotor hot plug fans
11.
System Battery
- 1 CPU – 5 standard fans
12.
Optional: TPM 2.0
- 2 CPUs – 7 standard fans
13.
Primary (CPU1) PCIe 3.0 riser
*Option: High Performance fans
Standard: GPU power connector + 1x 16 and 1x 8
NOTE: *For 10 NVMe chassis - 7 High Performance
Optional: 2 SATA M.2 + 2x 16
Fans will be shipped for 1 or 2 processors.
*Optional: 2x 4 NVMe + 1x 16 and 1x 8
2.
Option: Smart Storage Battery
NOTE: *Only available on 8 SFF.
3.
Up to 2 processors (shown with standard heat sinks)
14.
Optional: Front Display port / USB 2.0
4.
MicroSD card slot (Dual Micro-SD option available)
15.
FlexibleLOM (supports various NICs up to 25GbE)
5.
Option: Chassis Intrusion Detection
16.
x4 SATA port 1
6.
Hard Drive backplane power connector
17.
x4 SATA port 2
7.
Dual internal USB 3.0 connector
18.
x2 SATA port 3
8.
Smart Array Controller (Type -a shown)
19.
x1 SATA port 4
9.
Up to 2 Power Supplies for redundant power
20.
Optical / SATA port 5
10.
Secondary (CPU2) PCIe 3.0 riser
21.
Front Power USB 3.0 connector
Option: Low Profile x16 or
22.
DDR4 DIMM slots
*Option: Full Height x16
(Lose slot 2 on Primary riser)
(Fully populated 24 DIMMs shown)
NOTE: *For 10 NVMe chassis – Secondary Riser is not
available due to 10 x4 NVMe riser for PCIe direct attached.