ProLiant DL380 Gen10 Carrier Grade Server

ManualsBrandsHPE ManualsHardwareProLiant DL380 Gen10 rack-mountable - Xeon Silver 4210 2.2 GHz - 32 GB - no HDD

Table Of Contents

QuickSpecs

HPE ProLiant DL380 Gen10 Carrier Grade Supplement

Overview

Page 1

HPE ProLiant DL380 Gen10 Carrier Grade Server NEBS Level 3 and ETSI Certified

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are

ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales

representative for information on configurable product offerings and requirements.

1. Factory Integrated Models must start with a CTO Server.

2. FIO indicates that this option is only available as a factory installable option.

3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives

ordered with the server.

4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.

IMPORTANT:

To yield a carrier grade server that is compliant with all the required technical criteria, the product content is

limited to what is listed in this document. In addition, the following kits must be installed:

1. HP DL380 Gen10 High Performance Fan Kit - 867810-B21

2. All installed PCI risers must be NEBS certified versions:

HPE DL380 Gen10 x8/16/8 NEBS Riser Kit - 873209-B21

HPE DL380 Gen10 x8/16/8 M.2 NEBS Riser Kit - 826701-B21

HPE DL380 Gen10 x16 Tertiary NEBS Riser Kit - 826702-B21

NOTE: M.2 Riser is only supported in the primary PCI riser location.

Please refer to the HPE DL380 Gen10 Carrier Grade Conversion documentation on the HPE web

site: http://www.hpe.com/services/hpsc

Summary of content (13 pages)

PAGE 1
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Overview HPE ProLiant DL380 Gen10 Carrier Grade Server NEBS Level 3 and ETSI Certified This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. 1.
PAGE 2
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Configuration Information - Factory Integrated Models Step 1: Base Configuration (choose one of the following configurable models) CTO Server SKU Number TAA SKU Processor DIMM Slots Storage Controller PCIe Drive Cage - included Network Controller Fans Management USB HPE ProLiant DL380 Gen10 8 SFF CTO Server 868703-B21 875782-B21 Not included as standard 24-DIMM slots Embedded SW RAID with 14 SATA ports (12-ports accessible), choice of HPE modul
PAGE 3
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Configuration Information - Factory Integrated Models NOTE: For additional details on this processor please visit: https://h20195.www2.hpe.com/v2/Getdocument.aspx?docname=a00039606enw HPE DL380 Gen10 Intel Xeon-Gold 6130 (2.1GHz/16-core/120W) FIO Processor Kit HPE DL380 Gen10 Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) FIO Processor Kit HPE DL380 Gen10 Intel Xeon-Gold 5118 (2.
PAGE 4
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Configuration Information - Factory Integrated Models HPE Security Options HPE Trusted Platform Module 2.0 Gen10 Option NOTE: HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants. NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.
PAGE 5
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information. Note the http://www.hpe.
PAGE 6
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Core Options Memory Selection To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability, HPE recommends memory from the list located here: http://www.hpe.com/products/recommend. Best product availability is limited to US, Canada, and Latin America at this time.
PAGE 7
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Core Options HPE Networking 1 Gigabit Ethernet adapters HPE Ethernet 1Gb 4-port 331T Adapter HPE Ethernet 1Gb 2-port 332T Adapter HPE Ethernet 1Gb 2-port 361T Adapter HPE Ethernet 1Gb 4-port 366T Adapter 10 Gigabit Ethernet adapters HPE Ethernet 10Gb 2-port 521T Adapter HPE Ethernet 10Gb 2-port 530T Adapter HPE Ethernet 10Gb 2-port 530SFP Adapter HPE Ethernet 10Gb 2-port 535T Adapter HPE Ethernet 10Gb 2-port 562SFP+ Adapter HPE Ethernet 10Gb 2-p
PAGE 8
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Core Options HPE I/O Expansion Options NOTE: The Primary Riser shipping default in the chassis is a x8 FH, FL, x16 FH, FL and x8 FH, HL with m.2 support. NOTE: For a Secondary/Tertiary riser the second processor is required. NOTE: Primary Riser Slot 1. NOTE: Supports Full Height and Full length cards. NOTE: Bus width x8 x16, x8, Connector Width x16, x16, x8. NOTE: M.2 support on this riser.
PAGE 9
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Additional Options HPE Security HPE 2U Bezel Air Filter NEBs HPE Gen10 2U Bezel Kit HPE Trusted Platform Module 2.0 Gen10 Option NOTE: HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants. NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.
PAGE 10
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Storage NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows 2000, Windows Server 2003 and Linux, please see: https://www.hpe.com/us/en/product-catalog/storage/storage-adapters.hits-12.html. HPE Rack Options Rail Kits NOTE: Ball bearing rail kits contain telescoping rails which allow for in-rack serviceability.
PAGE 11
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Technical Specifications System Unit Dimensions Weight (approximate) Input Requirements (per power supply) 8.73 x 44.54 x 67.94 cm 3.44 x 17.54 x 26.75 in SFF Drives: Maximum: Minimum: 8 SFF chassis with 1x SFF HDD and 7 HDD blanks, 2x Drive Bay blanks, 1x processor including standard heatsink, 1x power supply (plus blank), 1x Smart Array, 1x Riser installed, cables for the above) 19.5 kg 43.00 lbs Minimum: 14.9 kg 32.
PAGE 12
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Technical Specifications ETSI EN 300 019-2-1: Storage, Class 1.2 ETSI EN 300 019-2-2: Transportation, Class 2.3 Relative Humidity Operating GR-63-CORE, Section 4.1.2: Shelf Level Operating Temperature and Humidity ETSI EN 300 019-2-3: Stationary Use at Weather Protected Locations, Class 3.1E (non-condensing) Non-operating GR-63-CORE, Section 4.1.1: Transportation and Storage Environment ETSI EN 300 019-2-1:Storage, Class 1.
PAGE 13
QuickSpecs HPE ProLiant DL380 Gen10 Carrier Grade Supplement Summary of Changes Date 15-Oct-2018 Version History Version 2 Action Changed 14-May-2018 Version 1 New Description of Change Configuration Information - Factory Integrated Models, Core Options, Aditional Options were updated. Content created. Sign up for updates © Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice.