ProLiant DL380 Gen10 Carrier Grade Server

QuickSpecs
HPE ProLiant DL380 Gen10 Carrier Grade Supplement
Configuration Information
- Factory Integrated Models
Page 4
HPE Security Options
HPE Trusted Platform Module 2.0 Gen10 Option
864279-B21
NOTE: HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy
Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants.
NOTE: HPE server systems can have a TPM
module (of any type) installed only once. It cannot be replaced
with any other TPM module.
HPE Gen10 TPM 1.2 FIO Setting
872108-B21
NOTE: TPM 2.0 is set as default, for 1.2 TPM setting instead, please select this option.
HPE Unique Options
HPE DL380 Gen10 x8/x16/x8 M.2 NEBS Riser Kit
826701-B21
NOTE: Primary Riser Slot 1.
NOTE: Supports Full Height and Full length cards.
NOTE: Bus width x16, x16, Connector Width x16, x16.
HPE DL38X Gen10 x8/x16/x8 PCIe NEBS Riser Kit
873209-B21
NOTE: Secondary Riser, Connector in slot 2 & 3 for GPU support.
NOTE: Supports Full Height and Full length cards.
NOTE: Bus width x16, x16, Connector Width x16, x16.
HPE DL380 Gen10 x16 Tertiary NEBS Riser
826702-B21
NOTE: Supports 1x 16 slot in the Tertiary location.
NOTE: Supports Full Height and full-length card.
NOTE: Bus width x16 Connector Width x16.
HPE 2U Bezel Air Filter NEBS-compliant Kit
P05420-B21
HPE 48VDC 2.85m Power Cable
Q0H80A
Step 4: Choose additional options for Factory Integration from Core and Additional
Options sections below