ProLiant DL380 Gen10 Server

ManualsBrandsHPE ManualsHardwareProLiant DL380 Gen10 rack-mountable - Xeon Silver 4210 2.2 GHz - 32 GB - no HDD

Table Of Contents

QuickSpecs

HPE ProLiant DL380 Gen10 Server

Configuration Information

- Factory Integrated Models

Page 26

CTO Server

8 SFF CTO Chassis

24 SFF CTO Chassis

8 LFF CTO Chassis

12 LFF CTO Chassis

Included Drive Cage

8 SFF SAS/SATA

3x 8 SFF SAS/SATA

8 LFF + UMB

12 LFF Chassis

Additional drive cages

Universal Media Bay

1 Optional

Not available

1 Included

Not available

ODD

1 Optional with UMB

Not available

1 Optional

Not available

8 SFF Drive Cage

Up to 2 Optional

Not available

8 NVME/SAS Bay

Up to 3 Optional

Not available

8 NVME Cage

Up to 3 Optional

Not available

2 SFF SAS/SATA (Front)

1 Optional with UMB

Not available

1 Optional

Not available

2 SFF SAS/SATA (Rear)

1 Optional

2 NVMe (Front)

1 Optional with UMB

Not available

1 Optional

Not available

4 LFF Mid-plane

Not available

1 Optional

3 LFF Rear

Not available

1 Optional

NOTE: This aplies to CTO configurations, field upgrades may differ depending field configuration.

NOTE: 3x 8 NVMe option on SFF will only allow for partial population of Box1 to max 20 NVMe.

Step 2a: Choose Required Options - Processors

(only one of the following unless otherwise noted)

Please select one –L21 processor required below.

For second processor, please select the same processor model with –B21 from Core Options – HPE Processors section.

For example: first processor, select 874752

L21 then for second processor, select 874752-B21.

NOTE: 8SFF CTO 1P models ship with 4 standard fans. The second processor option kit contains 2 additional fans. 12 LFF

and 24 SFF CTO Servers ship with 6 High performance fans included; 8LFF CTO Servers ship with 6 Standard fans included.

High performance fan kit is available to meet ambient temperature environments are are required for rear drives or NVMe

configurations.

NOTE: Maximum memory capacity per processor is dependent on processor models. All processors support up to 768 GB

max memory per processor except “M” model processors will support up to 1.5 TB max memory per processor.

NOTE: Mixing of 2 different processor models are NOT allowed.

NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity

and type of DIMMs installed.

NOTE: P

rocessors with 130W or higher will ship with the High Performance heat sink plus SKUs 8156, 6128, 5122 as noted

below. All other will processors will ship with the Standard heat sink.

Processor Option Kits

Required

Processor

Intel Xeon-Platinum - Extended

HPE DL380 Gen10 Intel® Xeon-Platinum 8180M (2.5GHz/28-core/205W) FIO Processor Kit (Extended)

874752-L21