ProLiant DL380 Gen10 Server

QuickSpecs
HPE ProLiant DL380 Gen10 Server
Core Options
Page 40
NOTE: An NVME (826689-B21 or 873781-B21) or Premium (826690-B21) drive cage is required to
support these drives in conjunction with a NVMe riser kit.
NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on
the HPE Solid State Drive QuickSpecs.
NOTE: With NVMe support only 1x Double Wide Graphics card is supported.
NOTE: Not supported by HPE Smart Array controllers.
NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21).
Hard Drive Blank Kits - Recommended
HPE Universal SATA HHHL 3yr Wty M.2 Kit (Recommended)
878783-B21
NOTE: This is a M.2 enablement standup card.
HPE Large Form Factor Hard Drive Blank Kit (Recommended)
666986-B21
HPE Small Form Factor Hard Drive Blank Kit (Recommended)
666987-B21
Hard Drive Kits - Recommended
HPE DL38X Gen10 3LFF Rear SAS/SATA Drive Kit (Recommended)
826685-B21
NOTE: This is supported in the LFF model only.
NOTE:
3 LFF rear drives will consume the 2nd riser expansion slot.
HPE DL38X Gen10 4LFF Midplane SAS/SATA HDD Kit (Recommended)
826686-B21
NOTE: Supported with both the 8 and 12 LFF model.
NOTE: Ships with low profile HeatSink for installation. Supporting processors below 125W.
NOTE: No support for the 8156, 6128 or the 5122 Processors.
NOTE: With this mid-tray only single-wide (8.5-inch cards with connections or less) cards are supported.
NOTE: This drive does support hot-swap drives.
NOTE: This requires High Performance Fans (867810-B21).
HPE DL38X Gen10 2SFF Premium HDD Front NVMe or Front/Rear SAS/SATA Kit (Recommended)
826687-B21
NOTE: HPE DL38X Gen10 Universal Media Bay Kit (Recommended) (826708-B21).
NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21).
NOTE: NVMe drives require the addition of an NVMe capable riser.
NOTE:
Drive cage can be used in the rear of the chassis, but will not support NVMe drives rear.
HPE DL38X Gen10 2SFF HDD SAS/SATA Riser Kit (Recommended)
826688-B21
NOTE: Supports 2 SFF rear in Riser1 or 2 location – max 2 supported SFF model.
NOTE: Supports 2 SFF rear in Riser1 or 2 location in LFF model. Note is 3 LFF rear option is selected
maximum of one in riser 1 location.
NOTE: Supports uFF drives.
HPE DL38X NVMe 8 Solid State Drive Express Bay Enablement Kit (Recommended)
826689-B21
NOTE: This option provides support for up to 8NVMe drives, and can be populated in all Boxes in the 8
SFF model.
NOTE: A maximum of 20 NVMe drives only are supported., this will mean partial population (4 drives)
when the 3
rd
cage is populated in Box 1.
NOTE: This will require the HPE DL38X Gen10 4-port 8 NVMe SlimSAS Riser (867807-B21).
NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21).
HPE DL38X Gen10 Premium 6 SFF SAS/SATA + 2 NVMe or 8 SFF SAS/SATA Bay Kit (Recommended)
826690-B21
NOTE: This option provides supports up to 8 SAS/SATA SFF drives or a combination of 6 SAT/SATA and
2 NVMe drives in the same cage, and can be populated in all Boxes in the SFF model.
NOTE: For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8
1-port 2 NVMe SlimSAS Riser (867806-B21); or the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser
(867808-B21).
NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21).
NOTE: This option provides supports up to 8 SAS/SATA SFF drives or a combination of 6 SAT/SATA and
2 NVMe drives in the same cage, and can be populated in all Boxes in the SFF model.
NOTE: For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8
1-port 2 NVMe SlimSAS Riser (867806-B21); or the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser
(867808-B21).