Product Data Sheet / Brochure

7 PCIe 3.0 X16 X16 Full-height,
full-length slot
Proc 2
8 PCIe 3.0 X8 X8 Full-height,
full-length slot
Proc 2
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: Max. 8 PCIe slots are available on the ML350 Gen10 .
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed
breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet .
One of the following depending on model
Software RAID HPE Smart Array S100i SR Gen10 SW RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support
an additional controller will be needed, and for CTO orders please also select the Legacy mode settings
part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
NOTE: The S100i uses 14 embedded SATA ports.
NOTE: The S100i only supports Windows. For Linux users, HPE offers a solution that uses in-distro
open-source software to create a two-disk RAID 1 boot volume. For more information visit:
https://downloads.linux.hpe.com/SDR/project/lsrrb/
Essential RAID
Controller
HPE Smart Array E208i-a SR Gen10 Controller
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID
Controller
HPE Smart Array P408i-a SR Gen10 Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P408e-p SR Gen10 Controller
HPE Smart Array P816i-a SR Gen10 Controller
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (P01367-B21) which is
sold separately.
Internal Storage Devices
One of the following depending on model
Optical Drive
Optional slim-line DVD-ROM/DVD-RW up to 1
Optional half-height (5.25"?) RDX or tape/LTO devices up to 2
Hard Drives
None ship standard
Maximum Internal Storage
CAPACITY CONFIGURATION
Hot Plug SFF SAS 48.0 TB 24 x 2 TB
Hot Plug SFF SATA 48.0 TB 24 x 2 TB
Hot Plug LFF SAS
144.0 TB 12 x 12 TB
Hot Plug LFF SATA 144.0 TB
12 x 12 TB
Hot Plug SFF SAS SSD 184.32 TB 24 x 7.68 TB
Hot Plug SFF SATA SSD 92.16 TB 24 x 3.84 TB
QuickSpecs
HPE ProLiant ML350 Gen10 Server
Standard Features
DA - 16055 Worldwide QuickSpecs — Version 4 — 12.4.2017 Page 10