Product Data Sheet / Brochure

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved
configurator. Contact your local sales representative for information on configurable product offerings and
requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of
initial hard drives ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional
information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server
HPE ML350 Gen10 4 LFF
CTO Server
HPE ML350 Gen10 8 SFF
CTO Server
HPE ML350 Gen10 8 SFF
Rack CTO Server
SKU Number
877625-B21 877626-B21 877627-B21
Processor
Sockets
Two as standard Two as standard Two as standard
Processor
Not included as standard Not included as standard Not included as standard
DIMM Slots
24-DIMM slots 24-DIMM slots 24-DIMM slots
Storage
Controller
Embedded SW RAID S100i with 14 SATA ports, choice of HPE modular Smart Array
(AROC) and/or PCIe Standup controller card (s)
PCIe 8 PCIe Gen3 slots (x16, x8, x16, x8, x16, x8, x16, x8) as standard
Drive Cage -
included
4 LFF 8 SFF 8 SFF
Network
Controller
Embedded 4x1GbE HPE Ethernet 1Gb 4-port 369i Adapter with optional 1/10/25Gb
Standup card
Fans
2-Standard 2-Standard 6-Standard
Power Supply
Cage included
HPE Flex Slot RPS cage
and PDB included
HPE Flex Slot RPS cage
and PDB included
HPE Flex Slot RPS cage
and PDB included
Management HPE iLO with Intelligent Provisioning (standard), iLO Advances and OneView (optional)
USB
6x 3.0/2.0 standard plus
front iLO Service Port
6x 3.0/2.0 standard plus
front iLO Service Port
6x 3.0/2.0 standard plus
front iLO Service Port
Tower-to-Rack
conversion kit
Optional Optional Easy Install rack-rail tray
(1U) with CMA included as
standard
NOTE: Refer to HPE Power Advisor Tool to review the power requirement for your selected configuration
and determine what power supply module(s) to select.
Additional drive
cages
Optional 4 LFF HDD Cage
kit, up to 2 (total of 3)
Optional 8 SFF HDD Cage
kit, up to 2 (total of 3)
Optional 8 SFF HDD Cage
kit, up to 2 (total of 3)
Half-Height Media
Bay
2 Optional 2 Optional 2 Optional
ODD 1 Optional 1 Optional 1 Optional
Redundant Fan
Cage Kit
Optional Optional Included as standard - total 6
fans included
8 SFF NVMe
Express Bay
Not available Optional, up to 1 Optional, up to 1
NOTE: This aplies to CTO configurations, field upgrades may differ depending on field configuration.
NOTE: The HH Media Bay (2) and slim ODD Bay together takes up the space of one 4 LFF or 8 SFF drive
QuickSpecs
HPE ProLiant ML350 Gen10 Server
Configuration Information - Factory Integrated Models
DA - 16055 Worldwide QuickSpecs — Version 4 — 12.4.2017 Page 23