Product Data Sheet / Brochure

Table Of Contents

cage, which means when media bay, ODD or both is selected, the max. drive cage installation will be 2.

NOTE:

To get advanced cooling in richer configurations and/or under certain ambient environmental

conditions, the Redundant Fan Cage Kit (874572-B21) which consists of one fan cage with 4 additional fans,

is REQUIRED. This kit is automatically selected when the Rack CTO SKU is selected. Refer to the

Redundaunt Fan Kit section or ML350 Gen10 User Guide for detail.

NOTE:

When the 8SFF Rack CTO Server (877627-B21) is selected, the Redundant Fan Cage Kit (874572-

B21) and ML350 Gen10 T/R Conversion Kit (874578-B21) will be automatically selected.

Step 2a: Choose Required Options - Processors

(only one of the following unless otherwise noted)

Please select one -L21 processor required below.

For second processor, please select the same processor model with -B21 from Core Options - HPE

Processors section.

For example: first processor, select 874752

L21 then for second processor, select 874752-B21.

NOTE:

1P models typically ship with 2 standard fans. 2P models will require selection of the Redundant

Fan Cage kit (874572-B21) which contains one fan cage along with 4 additional fans - total number of

fans required in the system will

be 6.

NOTE:

Maximum memory capacity per processor is dependent on processor models. All processors

support up to 768 GB max memory per processor except "?M"? model processors will support up to 1.5

TB max memory per processor.

NOTE:

Mixing of 2 different processor models are NOT allowed.

NOTE:

DDR4 speed is the maximum memory speed of the processor. Actual memory speed may

depend on the quantity and type of DIMMs installed.

NOTE:

rocessors higher than 85W will ship with the Performance heat sink. All other processors will

ship with the Standard heat sink.

Processor Option Kits

Required Processor

HPE ML350 Gen10 Intel® Xeon-Platinum 8180M (2.5GHz/28-core/205W)

FIO Processor Kit

878663-L21

NOTE: