Product Data Sheet / Brochure

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your
local sales representative for additional information. Note the Cabling Matrix can help to explain the cable
routing for each option.
HPE Unique Options
HPE ML350 Gen10 8SFF Hot Plug Drive Backplane Cage Kit 874568-B21
NOTE: Add additional 8 SFF Hot-Plug Hard Drive Cage, allowing for up to 24 SFF
Drive support (8+8+8).
HPE ML350 Gen10 4LFF Hot Plug Drive Backplane Cage Kit 874566-B21
NOTE: Add additional 4 LFF Hot-Plug Hard Drive Cage, allowing for up to 12 LFF
Drive support (4+4+4).
HPE ML350 Gen10 4LFF Non Hot Plug Drive Cage Kit 874567-B21
NOTE: Field upgrade only. NHP drive cage is for NHP server only. Add additional 4
LFF Non-Hot-Plug Hard Drive Cage, allowing for up to 12 LFF NHP Drive support
(4+4+4).
HPE ML350 Gen10 8SFF NVMe SSD Express Bay Enablement Kit with 2x4NVMe
Risers and Support Cables
874569-B21
NOTE: This kit contains two x4 Direct Attach PCIe NVMe Riser Boards with each
supporting up to 4 drives. When both Risers are installed, it supports 8 SFF NVMe
drives.
NOTE: SFF NVMe SSDs to be ordered separately.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan
Cage Kit (874572-B21).
HPE ML350 Gen10 RDX/LTO Media Drive Support Cable Kit with Fan Blank for
Long LTO
874570-B21
NOTE: Supporting cables to add additional RDX/tape devices for data backup or
archiving.
NOTE: RDX/tape devices to be ordered separately.
HPE ML350 Gen10 Slimline ODD Bay and Support Cable Kit 874577-B21
NOTE: Mechanical converter with supporting cable.
HPE ML350 Gen10 Embedded SATA Cable Kit for LFF Configuration 877578-B21
HPE ML350 Gen10 Embedded SATA Cable Kit for SFF Configuration 877579-B21
HPE ML350 Gen10 AROC Mini-SAS Cable Kit for LFF Configuration 874573-B21
HPE ML350 Gen10 AROC Mini-SAS Cable Kit for SFF Configuration 877575-B21
HPE ML350 Gen10 Smart Array/HBA Mini-SAS Cable Kit for LFF Configuration 874574-B21
HPE ML350 Gen10 Smart Array/HBA Mini-SAS Cable Kit for SFF Configuration 874575-B21
HPE ML350 Gen10 12Gb SAS Expander Card Kit with Cables 874576-B21
HPE ML350 Gen10 Redundent Fan Cage Kit with 4 Fan Modules 874572-B21
NOTE: Add additional 4 hot-plug fans installed in the fan cage to get N+1 fan
redundancy and/or for advanced cooling. Refer to later section for detail.
HPE ML350 Gen10 Flex Slot Redundant Power Supply Cage Kit with Power
Distribution Board
874571-B21
NOTE: Field upgrade only. Allowing field upgrade from the 500W standard
PSU/non-hot-plug/non-RPS to support HPE Flex Slot RPS.
HPE ML350 Gen10 GPU External Power Cable Kit 877628-B21
NOTE: Consists of two external power cables to feed power to GPU modules with
TDP larger than 75W.
HPE ML Gen10 Tower to Rack Conversion Kit with Sliding Rail Rack Shelf and
Cable Management Arm
874578-B21
NOTE: This kit is supported in both ML350 and ML110 Gen10.
QuickSpecs
HPE ProLiant ML350 Gen10 Server
Core Options
DA - 16055 Worldwide QuickSpecs — Version 4 — 12.4.2017 Page 29