User Manual
Table Of Contents
QuickSpecs
HPE ProLiant DL360 Gen10 Server
Standard Features
Page
13
Operating Systems and Virtualization Software
2
nd
Generation Intel® Xeon® Scalable Processor Family
• Windows Server 2019: Essentials, Standard, Datacenter
• Windows Server 2016:
Essentials, Standard, Datacenter
• Windows Server 2012 R2: Essentials, Standard, Datacenter
• Microsoft Hyper-V Server: 2012 R2, 2016 & 2019
• VMware vSphere: 6.0 U3, 6.5 U2 & 6.7 U1
• ClearVM: 7.6 & 8.0
• Red Hat Enterprise Linux (RHEL): 7.6 w/ Kbase **
and 8.0
• SUSE Linux Enterprise Server (SLES): 12 SP4 and 15 SP1 (includes Xen) **
1
st
Generation Intel® Xeon® Scalable Processor Family
• Windows Server 2019: Essentials, Standard & Datacenter
• Windows Server 2016
: Essentials, Standard & Datacenter
• Windows Server 2012 R2: Essentials, Standard & Datacenter
• Microsoft Hyper-V Server: 2012 R2, 2016 & 2019
• VMware vSphere: 6.0 U3, 6.5 & 6.7
• ClearVM: 2.0
• Red Hat Enterprise Linux (RHEL)
: 6.9 & 7.3**
• SUSE Linux Enterprise Server (SLES): 11 SP4, 12 SP2 & 15 (includes Xen) **
NOTE: **64-bit only;includes KVM
• ClearOS
NOTE: ClearOS allows you to build a fully functional server that is just right for
you at no upfront cost. For more information
on ClearOS, please visit http://www.hpe.com/servers/clearos.
• CentOS
NOTE: For more information on Hewlett Packard Enterprise
Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server.
http://www.hpe.com/info/ossupport
Graphics
• Integrated video standard
• Video modes up to 1920 x 1200 @ 60 Hz (32 bpp)
• 16 MB Video Memory
• HPE iLO 5 on system management memory
• 32 MB Flash
• 4 Gbit DDR3 with ECC protection
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured
configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Cla
ss 2
implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
NOTE: The UEFI System Utilities tool is analogous to the HPE ROM-
Based Setup Utility (RBSU) of legacy BIOS. For more
information, please visit http://www.hpe.com/servers/uefi.