User Manual

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Configuration Information
Page
36
This section lists some of the steps required to configure a Factory Integrated Model.
To ensure valid configurations are ordered,
Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact
your local sales representative for
information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with s
ufficient hard drive blanks based on number of drives ordered with
server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information
Step 1: Base Configuration (choose one of the following configurable models)
Network Choice
(NC) Models
Network
Choice models do not include embedded LOM. To enable networking capability please select a FlexibleLOM NIC
from the
Core Options section.
CTO Server
HPE DL360 Gen10 4LFF NC
CTO Server
HPE DL360 Gen10 8SFF NC
CTO Server
HPE DL360 Gen10 Premium
10NVMe NC CTO Svr
SKU Number
P19765-B21
P19766-B21
P19767-B21
TAA SKU*
P19768-B21
P19769-B21
P19770-B21
Processor
Not included as standard
DIMM Slots
24-DIMM slots (12 can be used for HPE Persistent Memory)
Storage Controller
Embedded SW RAID (S100i) with 14 SATA ports
Optional: Choice of HPE modular Smart Array and PCIe plug-in controller
PCIe
2 PCIe slots (1 x16 FH / 1 x8 LP)
Optional: 1 x16 FH or LP
2 PCIe slots (1 x16 FH / 1 x8 LP)
Optional: 1 x16 FH or LP
2 PCIe slots (1 x16 FH / 1 x8 LP)
Drive Cage - included
4 LFF - SAS/SATA
8 SFF - SAS/SATA
Optional: up to 2 NVMe or 2
Dual uFF (4x M.2 cartridges)
10 NVMe - SAS/SATA/NVME
Optional: 1 Dual uFF (2x M.2
cartridges)
Network Controller
Choice of HPE FlexibleLOM for primary NIC and stand up card for additional NICs.
NOTE: No embedded networking
Fans
1 CPU – 5 Standard Fans
2 CPU – 7 Standard Fans
Optional: High Performance
Fans
1 CPU – 5 Standard Fans
2 CPU – 7 Standard Fans
Optional: High Performance
Fans
2 CPU – 7 High Performance Fans
Management
HPE iLO with Intelligent Provisioning (standard)
Optional: iLO Advance and OneView
USB
Front: 1 USB 3.0 + iLO service port
Rear: 2 USB 3.0
Internal: 2 USB 3.0
Optional: 1 USB 2.0 (lose iLO serv. Port)
Front: 1 USB 3.0 + iLO service
port
Rear: 2 USB 3.0
Internal: 2 USB 3.0
NOTE:*HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal
Governmentcustomers. These products are either manufactured or substantially transformed in a designated country.