User Manual

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Core
Options
Page
44
Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise
recommends the use of a
Hewlett Packard Enterprise approved configurator. Contact your local sales representative for additional
information.
HPE Unique Options
Risers
HPE DL360 Gen10 Low Profile Riser Kit
867982-B21
HPE DL360 Gen10 SATA M.2 2280 Riser Kit
867978-B21
HPE DL360 Gen10 2P Full Height Riser and GPU Enablement Kit
867980-B21
NOTE: This kit is not available on the 10 NVMe model.
Riser Information*
Part number
Description
Riser position
Slot Bus width
(Gen3 lanes)
NVMe Direct Connect
Primary
Secondary
#1
#2
#3
Connectors
Max SSDs
n/a
HPE DL360 Gen10 x16/x8
Primary GPU Riser
D N x16 x8 O
867978-B21
HPE DL360 Gen10 x16/x16
SATA M.2 2280 Riser Kit
O N x16 x16 O
867980-B21
HPE DL360 Gen10 x16 FH GPU
Riser Kit
N O O n/a
4
x16
867982-B21
HPE DL360 Gen10 x16 LP Riser
Kit
N O O O x16
n/a
HPE DL360 Gen10 x16/x8 1-
port 2SFF NVMe Riser
1
O N x16 x8 O 1 2
n/a
HPE DL360 Gen10 5-port 10SFF
NVMe Riser Kit
2
N
D
3
O O O 5 10
867972-B21
HPE DL360 Gen10 1SFF
SAS/SATA Rear Backplane Kit
O
N O
x8 O
NOTE: D = Default on chassis; O = Optional; N = not supported or slot/connector not present.
NOTE:
1
Included on 2SFF NVMe Backplane Kit (871242-B21)
NOTE:
2
Included on 10SFF chassis (867960-B21 & 875967-B21) or 10SFF Premium backplane kit (867974-B21)
NOTE:
3
Included on 10SFF chassis (867960-B21 & 875967-B21)
NOTE:
4
When secondary full height kit is installed, then primary PCIe Slot #2 cannot be used. Only 2 full height slots are
supported.
NOTE:
*For additional details on ProLiant DL Gen10 server risers.
please visit: https://www.hpe.com/h20195/v2/Getdocument.aspx?docname=a00043229enw
Performance Cooling Options
HPE DL360 Gen10 High Performance Heat Sink Kit
871246-B21
HPE DL360 Gen10 High Performance Fan Kit
871244-B21
Universal Media Bay Options
HPE DL360 Gen10 2SFF SAS/SATA Backplane Kit
867966-B21
HPE DL360 Gen10 2SFF NVMe Backplane Kit
871242-B21
HPE DL360 Gen10 2SFF SATA UFF Backplane Kit
867970-B21
HPE DL360 Gen10 8SFF Display Port/USB/Optical Drive Blank Kit
868000-B21
NOTE: This kit is required for Optical Drive option (8SFF model only).
HPE DL360 Gen10 LFF Display Port and USB Kit
868004-B21