QuickSpecs HPE ProLiant DL160 Gen10 Server Overview HPE ProLiant DL160 Gen10 Server The secure 2P 1U HPE ProLiant DL160 Gen10 server delivers the right balance of performance, storage, reliability, manageability and efficiency in a dense and compact chassis, to meet the needs of growing businesses of a diverse set of customers – from SMB to Service Providers running wide range of workloads - at a compelling price point. 1. 2. 3. 4. 5. 8 SFF chassis - Front View Quick removal access panel 6.
QuickSpecs HPE ProLiant DL160 Gen10 Server Overview 4 LFF chassis - Front View 6. NIC status LED 7. Health LED 8. Power On/Standby button and system power LED 9. 4 SAS/SATA drive bays 1. 2. 3. 4. 5. Quick removal access panel Serial no. label pull tab iLO Service Port USB 3.0 Port UID button/LED 1. 2. 3. 4. Slot 1 PCIe 3.0 Slot 2 PCIe 3.0 Optional: Slot 3 PCIe 3.0 (Requires 2nd processor) Power Supply (Redundant hot-plug shown) Rear View 5. Embedded 2x 1GbE Adapter 6. VGA Port 7.
QuickSpecs HPE ProLiant DL160 Gen10 Server Overview 8SFF chassis – with optional 2nd CPU - Internal View 1. Standard single rotor hot swap fans 1 CPU – 3 standard fans Optional: 2 CPUs – 6 standard fans (redundant fan shown) 11. MicroSD card slot 2. Optional: Smart Storage Battery (No battery shown) 12. iLO Service Port Connector 3. DDR4 DIMM slots (Fully populated 16 DIMMs shown) 13. Primary (CPU1) PCIe 3.0 riser 4. Up to 2 processors (shown with standard heat sinks) 14. Mini-SAS port 1 5.
QuickSpecs HPE ProLiant DL160 Gen10 Server Overview What's New Additional options available to add as “ad-hoc” in OCA • HPE 32GB 2Rx4 PC4-2666V-R Smart Kit • 2TB/4TB SATA LFF HDDs • 1TB/2TB SATA SFF HDDs • 300GB/600GB & 1.8TB/2TB SAS SFF HDDs • 240GB/960GB SATA SFF SSDs • 800GB/960GB SFF SAS SSDs • SATA M.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Processors – Up to 2 of the following depending on model. NOTE: For more information regarding Intel Xeon processors, please see the following: https://www.intel.com/content/www/us/en/products/processors/xeon.html Intel Xeon Models CPU Cores L3 Cache Power UPI DDR4 Memory per Frequency socket Silver Processors Silver 4110 Processor 2.1 GHz 8 11.00 MB 85W 2 @ 9.6 GT/s 2400 MT/s 768 GB Bronze Processors Bronze 3106 Processor 1.7 GHz 8 11.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Expansion Slots FlexibleLOM Riser Slots # Slot Form Factor Notes Flexible LOM Half-height, half-length slot NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector. NOTE: This riser is mandatory for installing FlexibleLOMs. NOTE: FlexibleLOM riser will replace standard CPU1 X16/X8 riser. CPU2 Riser Slots # Technology Bus Connector Width Slot Form Factor Width 1 PCIe 3.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Maximum Internal Storage Hot Plug SFF SAS HDD Hot Plug LFF SAS HDD Hot Plug SFF SATA HDD Hot Plug LFF SATA HDD Hot Plug SFF SAS SSD Hot Plug SFF SATA SSD Capacity 16 TB 8 TB 16 TB 16 TB 7.6 TB 7.6 TB Configuration 8 X 2 TB 4 X 2 TB 8 X 2 TB 4 X 4 TB 8 X 960GB 8 X 960GB Power Supply HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit NOTE: Available in 94% efficiency.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Industry Standard Compliance • ACPI 6.1 Compliant • PCIe 3.0 Compliant • WOL Support • Microsoft® Logo certifications • PXE Support • USB 3.0 Compliant (internal) • SMBIOS 3.1 • UEFI 2.6 • Redfish API • IPMI 2.0 • Secure Digital 2.0 • Advanced Encryption Standard (AES) • Triple Data Encrytion Standard (3DES) • SNMP v3 • TLS 1.2 • DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP) • Active Directory v1.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features HPE Server UEFI/Legacy ROM Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Service Pack for ProLiant (SPP) The Service Pack for ProLiant (SPP) is a comprehensive collection of server firmware, drivers, and system software tested as a single solution stack, which is delivered as a single ISO image. Learn more at http://www.hpe.
QuickSpecs HPE ProLiant DL160 Gen10 Server Standard Features Warranty This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
QuickSpecs HPE ProLiant DL160 Gen10 Server Optional Features Server Management HPE iLO Advanced HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality.
QuickSpecs HPE ProLiant DL160 Gen10 Server Service and Support HPE Pointnext - Service and Support Protect your business beyond warranty with HPE Support Services HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational Services to help accelerate your digital transformation. From the onset of your transformation journey, Advisory and Transformational Services focus on designing the transformation and creating a solution roadmap.
QuickSpecs HPE ProLiant DL160 Gen10 Server Pre-configured Models 1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs. 2. Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately. Entry Model Base Model SKU Number **878968-B21 **878970-B21 HPE ProLiant DL160 Gen10 3106 1.
QuickSpecs HPE ProLiant DL160 Gen10 Server Core Options HPE Processors Processor Option Kits HPE DL160 Gen10 Intel Xeon-Silver 4110 (2.1GHz/8-core/85W) Processor Kit 878947-B21 HPE DL160 Gen10 Intel Xeon-Bronze 3106 (1.7GHz/8-core/85W) Processor Kit 878945-B21 NOTE: Up to two processors supported. NOTE: Turbo2: Intel® Turbo Boost Technology 2.
QuickSpecs HPE ProLiant DL160 Gen10 Server Core Options HPE I/O Expansion Options HPE DL160 Gen10 FlexibleLOM/NVMe Riser Kit NOTE: Supported on CPU1 NOTE: This riser is required to use FlexibleLOM adapters HPE DL160 Gen10 CPU2 x16 PCIe Riser Kit NOTE: Requires second processor to be installed 875748-B21 866436-B21 HPE Power Supplies HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit 865408-B21 NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a sta
QuickSpecs HPE ProLiant DL160 Gen10 Server Additional Options Embedded Management HPE iLO Advanced HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features HPE iLO Advanced Flexible Quantity License with 1yr Support on iLO Licensed Features HPE iLO Advanced AKA Tracking License with 1yr Support on iLO Licensed Features HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features HPE iLO Advanc
QuickSpecs HPE ProLiant DL160 Gen10 Server Additional Options Optional Software HPE Smart Array SR Secure Encryption (Data at Rest Encryption/per Server Entitlement) E-LTU Q2F26AAE HPE Smart Array SR SmartCache (Single Key/Single Server) LTU D7S26A HPE Smart Array SR SmartCache (Single Key/Multiple Servers) LTU D7S27A HPE Smart Array SR SmartCache (Single Key/Multiple Servers) E-LTU D7S27AAE NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers Optional Upgrades HPE 96W Smart Storage
QuickSpecs HPE ProLiant DL160 Gen10 Server Additional Options Additional options available to add as “ad-hoc” in OCA NOTE:*These options will not be visible in OCA and must be added manually via the ad-hoc section HPE Memory HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model. HPE Drives Enterprise - 12G SAS - SFF Drives HPE 1.8TB SAS 12G Enterprise 10K SFF (2.
QuickSpecs HPE ProLiant DL160 Gen10 Server Additional Options HPE Networking 10 Gigabit Ethernet adapters HPE Ethernet 10Gb 2-port 530SFP Adapter HPE Ethernet 10Gb 2-port 521T Adapter NOTE: Max 1 per system HPE Ethernet 10Gb 2-port 530T Adapter 25 Gigabit Ethernet adapters HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter 1 Gigabit Ethernet adapters HPE Ethernet 1Gb 4-port 366T Adapter NOTE: Max 1 per system.
QuickSpecs HPE ProLiant DL160 Gen10 Server Memory Memory Population guidelines HPE DL160/DL180 Gen 10 Servers Front Server (2+1+1 slots per channel) HPE ProLiant Gen10 8 slot per CPU DIMM population order NOTE:*Unbalanced, not recommended Page 21
QuickSpecs HPE ProLiant DL160 Gen10 Server Memory General Memory Population Rules and Guidelines: • Install DIMMs only if the corresponding processor is installed. • If only one processor is installed in a two-processor system, only half of the DIMM slots are available. • To maximize performance, it is recommended to balance the total memory capacity between all installed processors. • When two processors are installed, balance the DIMMs across the two processors.
QuickSpecs HPE ProLiant DL160 Gen10 Server Technical Specifications System Unit Dimensions Weight (approximate) Input Requirements (per power supply) BTU Rating Power Supply Output (per power supply) System Inlet Temperature 4.29 x 43.46 x 61.49 cm 1.69 x 17.11 x 24.21 in 24.19lb SFF Minimum: 8 SFF chassis with 1x SFF HDD, 1 X Memory DIMM, 3 Fans, 10.97kg 1 Processor with heatsink, 1 power supply , 30.69 lb SFF Maximum: 8SFF chassis with 8 SFF HDD, 1 X Memory DIMM, 6 Fans, 13.
QuickSpecs HPE ProLiant DL160 Gen10 Server Technical Specifications Relative Humidity (non-condensing) Altitude Acoustic Noise Operating 8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing. Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.. Operating 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
QuickSpecs HPE ProLiant DL160 Gen10 Server Technical Specifications HPE Smart Array For latest information on HPE Smart Array Gen10 Controllers for HPE ProLiant DL, ML and Apollo Servers please refer to their QuickSpecs. (E208i-a,E208i-p,E208e-p,P408i-a,P408i-p,P408e-p,P816i-a) https://h20195.www2.hpe.com/v2/getdocument.
QuickSpecs HPE ProLiant DL160 Gen10 Server Summary of Changes Date 12-Aug-2019 Version History Action Version 5 Changed 05-Aug-2019 Version 4 Changed 03-Jun-2019 15-Apr-2019 Version 3 Version 2 Changed Changed 04-Feb-2019 Version 1 New Description of Change Overview, Standard Features, Additional Options and Memory sections were updated. Overview, Standard Features, Optional Features,Additional Options and Memory sections were updated.
