ProLiant DL160 Gen10 Server

QuickSpecs
HPE ProLiant DL160 Gen10 Server
Standard Features
Page 7
Internal Storage Devices
Hard Drives
None ship standard
Maximum Internal Storage
Capacity
Configuration
Hot Plug SFF SAS
9.6 TB
8 X 1.2 TB
Hot Plug LFF SAS
8 TB
4 X 2 TB
Hot Plug LFF SATA
4 TB
4 X 1 TB
Hot Plug SFF SAS SSD
3.2 TB
8 X 400GB
Hot Plug SFF SATA SSD
3.84 TB
8 X 480 GB
Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-
less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation an
d
offer multiple power output options, allowing users to "right-
size" a power supply for specific server configurations. This flexibility helps
to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-
14 jumper cord (A0K02A). This jumper cord is also included with
each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
For information on power specifications and technical content visit
HPE Server power supplies
.
Interfaces
Video
1 rear – VGA Port (standard )
Network Ports
2 x 1 GbE ports embedded on board with optional FlexibleLOM
HPE iLO Remote Management
Network Port
1 Gb Dedicated
Front iLO Service Port
1 standard
Micro SD Slot
1 Micro SD
NOTE:
The Micro SD slot is not a hot-
pluggable device. Customers should not attempt to plug an SD card into the SD slot while
the server is powered.
USB 3.0
Up to 4 total: 1 front, 2 rear, 1 internal