Product Data Sheet / Brochure

QuickSpecs
HPE ProLiant DL180 Gen10 Server
Standard Features
Page
8
Software RAID
• HPE Smart Array S100i SR Gen10 SW RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support
an additional controller will
be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
NOTE: The S100i uses 14 embedded SATA ports
NOTE:
HPE Smart Array S100i SR Gen10 SW RAID only supports Windows and does not support Linux. For Linux users, HPE
offers a solution that uses in-distro open-source software to create a two-
disk RAID 1 boot volume. For more information
visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/
Essential RAID Controller
• HPE Smart Array E208i-p SR Gen10 Controller
• HPE Smart Array E208e-p SR Gen10 Controller
• HPE Smart Array E208i-a SR Gen10 Controller
Performance RAID Controller
• HPE Smart Array P408i-a SR Gen10 Controller
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (P01366-B21) which is sold separately.
Internal Storage Devices
One of the following depending on model
Hard Drives
None ship standard
Maximum Internal Storage
Capacity
Configuration
Hot Plug SFF SAS
9.6 TB
8X1.2 TB
Hot Plug SFF SAS SSD
3.2 TB
8X400 GB
Hot Plug SFF SATA SSD
Hot Plug LFF SAS HDD
Hot Plug LFF SATA HDD
3.8 TB
32 TB
32 TB
8X480 GB
8X4 TB
8X4 TB
Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-
less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation an
d
offer multiple power output options, allowing users to "right-
size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-
14 jumper cord (A0K02A). This jumper cord is also included with
each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit
HPE Server power supplies
.