ProLiant DL180 Gen10 Server

QuickSpecs
HPE ProLiant DL180 Gen10 Server
Standard Features
Page 6
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed brea
kout
of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
One of the following depending on model
Software RAID
HPE Smart Array S100i SR Gen10 SW RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an
additional controller will
be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
NOTE: The S100i uses 14 embedded SATA ports
NOTE:
HPE Smart Array S100i SR Gen10 SW RAID only supports Windows and does not support Linux. For Linux users, HPE
offers a solution that uses in-distro open-source software to create a two-
disk RAID 1 boot volume. For more information
visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/
Essential RAID Controller
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
NOTE:
Performance RAID Controllers require the HPE Smart Storage Battery (P01366-B21) which is sold separately.
Internal Storage Devices
One of the following depending on model
Optical Drive
Optional: DVD-ROM, DVD-RW
Hard Drives
None ship standard
Maximum Internal Storage
Capacity
Configuration
Hot Plug SFF SAS
9.6 TB
8X1.2 TB
Hot Plug SFF SAS SSD
3.2 TB
8X400 Gb
Hot Plug SFF SATA SSD
3.8 TB
8X480 Gb