ProLiant DL360 Gen10 Server

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Configuration Information
- Factory Integrated Models
Page 23
Recommended
Offering the best combination of performance, value and availability, Recommended Options have been selected by HPE experts t
o
provide the right technology for a range of workloads and market segments. Fully integrated into the ProLiant management and
security experience, Recommended Options provide the best fit with timely availability.
Extended
Extended Options provide an extended catalog of products tailored for customers in specific markets or with specific workloads,
requiring the utmost in performance or value. Fully integrated into the ProLiant management and security experience, Extended
Options represent great value and performance but typically have a longer lead-time.
This section lists some of the steps required to configure a Factory Integrated Model.
To ensure valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator.
Contact your local sales representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on number of drives ordered with server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server
4 LFF
8 SFF
Premium 10 NVMe
SKU Number
867958-B21
867959-B21
867960-B21
TAA SKU*
875965-B21
875966-B21
875967-B21
Processor
Not included as standard
DIMM Slots
24-DIMM slots (12 can be used for NVDIMMs)
Storage
Controller
Embedded SW RAID (S100i) with 14 SATA ports
Optional: Choice of HPE modular Smart Array and PCIe plug-in controller
PCIe
2 PCIe slots (1 x16 FH / 1 x8 LP)
Optional: 1 x16 FH or LP
2 PCIe slots (1 x16 FH / 1 x8 LP)
Optional: 1 x16 FH or LP
2 PCIe slots (1 x16 FH / 1 x8 LP)
Drive Cage -
included
4 LFF - SAS/SATA
8 SFF - SAS/SATA
Optional: up to 2 NVMe or 2 Dual
uFF (4x M.2 cartridges)
10 NVMe - SAS/SATA/NVME
Optional: 1 Dual uFF (2x M.2
cartridges)
Network
Controller
HPE 1Gb Ethernet 4-Port 331i Adapter plus optional HPE FlexibleLOM or stand up card
Fans
1 CPU – 5 Standard Fans
2 CPU – 7 Standard Fans
Optional: High Performance Fans
1 CPU – 5 Standard Fans
2 CPU – 7 Standard Fans
Optional: High Performance Fans
2 CPU – 7 High Performance Fans
Management
HPE iLO with Intelligent Provisioning (standard)
Optional: iLO Advance and OneView
USB
Front: 1 USB 3.0 + iLO service port
Rear: 2 USB 3.0
Internal: 2 USB 3.0
Optional: 1 USB 2.0 (lose iLO serv. Port)
Front: 1 USB 3.0 + iLO service port
Rear: 2 USB 3.0
Internal: 2 USB 3.0
NOTE: HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal
Government customers. These products are either manufactured or substantially transformed in a designated country.
NOTE: *
TAA chassis are only orderable in North America and Canada.