ProLiant DL360 Gen10 Server

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Standard Features
Page 9
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controllers
HPE Smart Array P408i-a SR Gen10 Controller
HPE Smart Array P408i-a SR G10 LH Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P408e-p SR Gen10 Controller
HPE Smart Array P816i-a SR Gen10 Controller
HPE Smart Array P816i-a SR G10 LH Controller
NOTE: If GPGPU is needed then please order the LH controller (low profile heatsink) to allow GPU to fit in the chassis.
NOTE: For additional details, please see HPE Smart Array Gen10 Controllers Data Sheet.
Internal Storage Devices
Optical Drive
Available on 8 SFF and 4 LFF CTO Servers as an option (DVD-ROM or DVD-RW)
Hard Drives
None ship standard
Maximum Storage
STORAGE
CAPACITY
CONFIGURATION
Hot Plug SFF SAS HDD
26.4 TB
8+2+1 x 2.4 TB (with optional UMB + rear drive option)
Hot Plug SFF SATA HDD
22 TB
8+2+1 x 2.0 TB (with optional UMB + rear drive option)
Hot Plug SFF SAS SSD
168.3 TB
8+2+1 x 15.3 TB (with optional UMB + rear drive option)
Hot Plug SFF SATA SSD
42.24 TB
8+2+1 x 3.84 TB (with optional UMB + rear drive option)
Hot Plug SFF NVMe PCIe SSD
40 TB
10 x 4 TB NVMe
Hot Plug LFF SAS HDD
48 TB
4 x 12 TB
Hot Plug LFF SATA HDD
48 TB
4 x 12 TB
Hot Plug LFF SAS SSD
3.2 TB
4 x 800 GB
Hot Plug LFF SATA SSD
15.36 TB
4 x 3.84 TB
Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% and 96% efficiency.
NOTE: Also available in -48VDC and 227VAC/380VDC power inputs.
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
NOTE: 1600W Power supplies only support high line voltage (200 VAC to 240 VAC).
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation
and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This
flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included
with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables
web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.