QuickSpecs HPE ProLiant DL360 Gen10 Server Overview HPE ProLiant DL360 Gen10 Server Does your data center need a secure, performance driven dense server that you can confidently deploy for virtualization, database, or high-performance computing? The HPE ProLiant DL360 Gen10 server delivers security, agility and flexibility without compromise. The HPE ProLiant DL360 Gen10 Server supports the Intel® Xeon® Scalable Processor Family with up to 28 cores, plus 2933 MT/s HPE DDR4 SmartMemory supporting up to 3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Overview Premium 10SFF NVMe Front View 1. 2. 3. 4. 5. Drive support label Quick removal access panel Serial no. label pull tab Power On/Standby button and system power LED Health LED 6. 7. 8. 9. 10. NIC status LED UID button/LED USB 3.0 port iLO Service Port Max up to 10 NVMe drives (PCIe direct attached) or 8 SAS/SATA/NVMe + 2 NVMe NOTE: Rear drive option allows for an additional + 1 SFF or +1 Dual uFF (2x M.2 cartridges).
QuickSpecs HPE ProLiant DL360 Gen10 Server Overview Internal View - Standard for all DL360 Gen10 1. For 8 SFF or 4 LFF - Standard single rotor hot plug fans1 13. Primary (CPU1) PCIe 3.0 riser (Standard: GPU power 1 CPU – 5 standard fans connector + 1x 16 and 1x 8) 2 CPUs – 7 standard fans Option: 2 SATA M.2 + 2x 16 Option: High Performance fans Option: (8 SFF only): 2x 4 NVMe + 1x 16 and 1x 8 2. Option: HPE Smart Hybrid Capacitor or HPE Smart Storage 14. Option: Front Display port / USB 2.0 Battery 3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Overview Rear View – Standard for all DL360 Gen10 1. Slot 1 PCIe 3.0 7. Embedded 4x 1GbE Adapter (if equipped)7 1 Option: Rear Drive +1 SFF or 1 uFF SSD (2x M.2 cartridges) 8. iLO Management Port 2. Slot 2 PCIe 3.0 9. Option: Serial Port 3. Option: Slot 3 PCIe 3.0 (Requires 2nd processor) 10. USB 3.0 Ports 4. Power Supply 2 11. Option: FlexibleLOM (Shown: 4x 1GbE)11 5. Power Supply 1 6. VGA port NOTE: 1 Will lose one FH x16 PCIe slot1 with this option.
QuickSpecs HPE ProLiant DL360 Gen10 Server Overview Platform Information Form Factor • 1U rack Chassis Types • 8 SFF with options supporting: +2 SFF or 2 NVMe or 2 Dual uFF (4x M.2 cartridges) • 10 SFF NVMe Premium • 4 LFF NOTE: Rear drive option available on all DL360 Gen10 chassis types for additional boot/storage: +1SFF or 1 Dual uFF (2x M.2 cartridges).
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features Standard Features Processors – Up to 2 of the following depending on model. NOTE: The 2nd digit of the processor model number “x1xx” and “x2xx” is used to denote the processor generation (i.e. 1=1st generation and 2=2nd generation) NOTE: Field upgrades from 1st generation processors (x1xx) to 2nd generation processors (x2xx) not supported. NOTE: “U” processors (i.e.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features 1st Generation Intel® Xeon® Scalable Processor Family Intel Xeon Models CPU Cores L3 Cache Frequency Platinum 8180M Processor 2.5 GHz 28 38.50 MB Platinum 8180 Processor 2.5 GHz 28 38.50 MB Platinum 8176 Processor 2.1 GHz 28 38.50 MB Platinum 8170 Processor 2.1 GHz 26 35.75 MB Platinum 8168 Processor 2.7 GHz 24 33.00 MB Platinum 8165 Processor 2.3 GHz 24 33.00 MB Platinum 8164 Processor 2.0 GHz 26 35.75 MB Platinum 8160M Processor 2.1 GHz 24 33.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features 2nd Generation Intel® Xeon® Scalable Processor Family Intel Xeon Models CPU Cores L3 Cache Frequency Power UPI DDR4 Memory per socket 1TB 1TB 1TB 1TB 1TB 1TB 1TB 4.5TB 2TB Gold 5220 Processor 2.2 GHz 18 24.75 MB 125W 2 @ 10.4 GT/s 2666 MT/s Gold 5220S Processor 2.7 GHz 18 24.75 MB 125W 2 @ 10.4 GT/s 2666 MT/s Gold 5218 Processor 2.3 GHz 16 22 MB 125W 2 @ 10.4 GT/s 2666 MT/s 2.3 GHz 16 22 MB 110W 2 @ 10.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features NOTES: • 6-Channel 1DPC DDR4 @ 2400 MT/s (SKU 5122 - supports 2666 MT/s). • 768 GB max memory capacity (1.5 TB on select skus). • 2 and 4 socket capable, 2S - 2UPI, 4S - 3UPI @ 10.4 GT/s. • Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512 (1x 512-bit FMA) (SKU 5122 supports 2x 512 bit FMA). • 48 lanes PCIe 3.0, advanced RAS.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features NOTES: • 6-Channel DDR4 @ 2133 MT/s. • 2TB max RAM • Support for: Intel® Vector Neural Network Instructions (VNNI) for inference acceleration.. • 2 and 4 socket capable, 2S - 2UPI, 2S - 3UPI, 4S - 3UPI @ 9.6 GT/s. • Intel AVX-512 (2x 512-bit FMA). • 48 lanes PCIe 3.0, standard RAS 1st Generation Intel® Xeon® Scalable Processor Family Intel Xeon Models CPU Cores Frequency Bronze 3106 Processor 1.7 GHz 8 Bronze 3104 Processor 1.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features Online Spare Memory online spare mode detects a rank that is degrading and switches operation to the spare rank. NOTE: For more information see our Memory RAS feature technical whitepaper. Expansion Slots Primary GPU Riser Expansion Slots # Technology 1 PCIe 3.0 2 PCIe 3.0 Bus Width x16 x8 Connector Width x16 x8 Processor CPU1 CPU1 Slot Form Factor Full-height, 3/4 length (up to 9.5in) Low Profile Primary SATA M.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features Essential RAID Controllers • HPE Smart Array E208i-a SR Gen10 Controller • HPE Smart Array E208i-a SR G10 LH Controller • HPE Smart Array E208i-p SR Gen10 Controller • HPE Smart Array E208e-p SR Gen10 Controller Performance RAID Controllers • HPE Smart Array P408i-a SR Gen10 Controller • HPE Smart Array P408i-a SR G10 LH Controller • HPE Smart Array P408i-p SR Gen10 Controller • HPE Smart Array P408e-p SR Gen10 Controller • HPE Smart Array P816i
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features Operating Systems and Virtualization Software 2nd Generation Intel® Xeon® Scalable Processor Family • Windows Server 2019: Essentials, Standard, Datacenter • Windows Server 2016: Essentials, Standard, Datacenter • Windows Server 2012 R2: Essentials, Standard, Datacenter • Microsoft Hyper-V Server: 2012 R2, 2016 & 2019 • VMware vSphere: 6.0 U3, 6.5 U2 & 6.7 U1 • ClearVM: 7.6 & 8.0 • Red Hat Enterprise Linux (RHEL): 7.6 w/ Kbase ** and 8.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features Interfaces Serial Video Network Ports iLO Remote Mgmt Port MicroSD Slot USB 3.0 SID (Systems Insight Display) 1 port - Optional 1 Front - Display port (optional 8 SFF and 4 LFF only) 1 Rear - VGA port (standard on all chassis types) NOTE: Both ports are not active simultaneously.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features HPE Server UEFI/Legacy ROM UEFI enables numerous new capabilities specific to HPE ProLiant servers such as: • Secure Boot and Secure Start enable for enhanced security • Operating system specific functionality • Support for > 2.2 TB (using GPT) boot drives • USB 3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features iLO Amplifier Pack Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at http://www.hpe.com/servers/iLOamplifierpack.
QuickSpecs HPE ProLiant DL360 Gen10 Server Standard Features Security • UEFI Secure Boot and Secure Start support • Immutable Silicon Root of Trust • FIPS 140-2 validation • Common Criteria certification • Configurable for PCI DSS compliance • Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser • Support for Commercial National Security Algorithms (CNSA) • iLO Security Modes • Granular control over iLO interfaces • Smart card (PIV/CAC) and Kerberos based 2-factor Authe
QuickSpecs HPE ProLiant DL360 Gen10 Server Optional Features Server Management HPE iLO Advanced HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality.
QuickSpecs HPE ProLiant DL360 Gen10 Server Optional Features One Config Simple (SCE) SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes.
QuickSpecs HPE ProLiant DL360 Gen10 Server Service and Support HPE Pointnext - Service and Support Protect your business beyond warranty with HPE Pointnext Operational Service HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational Services to help accelerate your digital transformation. From the onset of your transformation journey, Advisory and Transformational Services focus on designing the transformation and creating a solution roadmap.
QuickSpecs HPE ProLiant DL360 Gen10 Server Service and Support Other related Services HPE Server Hardware Installation Provides for the basic hardware installation of HPE branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner. https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.
QuickSpecs HPE ProLiant DL360 Gen10 Server Service and Support HPE Support Center The HPE Support Center is a personalized online support portal with access to information, tools and experts to support HPE business products. Submit support cases online, chat with Hewlett Packard Enterprise experts, access support resources or collaborate with peers.Learn more http://www.hpe.com/support/hpesc.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models 1. Pre- Configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs. 2. Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately. 3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 2nd Generation Intel Xeon Processors Network Choice Models P19774-xx1 P19776-xx1 P19779-xx1 SKU Number HPE ProLiant DL360 Gen10 HPE ProLiant DL360 Gen10 HPE ProLiant DL360 Gen10 Model Name 4208 2.1GHz 8-core 1P 16GB- 4208 2.1GHz 8-core 1P 16GB- 4210 2.2GHz 10-core 1P R P408i-a NC 8SFF 500W PS R S100i NC 4LFF 500W PS 16GB-R P408i-a NC 8SFF Server Server 500W PS Server 8SFF 4LFF 8SFF Chassis 4208 (8 core, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 2nd Generation Intel Xeon Processors Network Choice Models P19775-xx1 SKU Number HPE ProLiant DL360 Gen10 4214 2.2GHz 12-core 1P Model Name 16GB-R P408i-a NC 8SFF 500W PS Server 8SFF Chassis 4214 (12 cores, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 2nd Generation Intel Xeon Processors Network Choice Models P19177-xx1 SKU Number HPE ProLiant DL360 Gen10 5220 2.2GHz 18-core 1P Model Name 32GB-R P408i-a NC 8SFF 800W PS Server 8SFF Chassis 5220 (18-Core, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 2nd Generation Intel Xeon Processors Network Choice Models P19179-B21 P19180-B21 SKU Number HPE ProLiant DL360 Gen10 6234 3.3GHz 8HPE ProLiant DL360 Gen10 6242 2.8GHz 16Model Name core 1P 32GB-R P408i-a NC 8SFF core 1P 32GB-R P408i-a NC 8SFF 8SFF 8SFF Chassis 6234 (8-Core, 3.3 GHz, 130W) 6242 (16-Core, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models BTO Models with embedded LOM Powered by 2nd Generation Intel Xeon Processors Embedded LOM Models P02722-xx1 SKU Number HPE ProLiant DL360 Gen10 Model Name 5220 2.2GHz 18-core 2P 64GB-R P408i-a 8SFF 800W RPS Server 8SFF Chassis 5220 (18-Core, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 2nd Generation Intel Xeon Processors Embedded LOM Models P03629-xx1 P03630-xx1 P03635-xx1 SKU Number HPE ProLiant DL360 Gen10 HPE ProLiant DL360 Gen10 HPE ProLiant DL360 Gen10 Model Name 3204 1.9GHz 6-core 1P 16GB-R 4208 2.1GHz 8-core 1P 16GB-R 4208 2.1GHz 8-core 1P 16GB-R S100i 8SFF 500W PS Server P408i-a 8SFF 500W PS Server S100i 4LFF 500W PS Server 8SFF 8SFF 4LFF Chassis 3204 (6 core, 1.9 GHz, 85W) 4208 (8 core, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 2nd Generation Intel Xeon Processors Embedded LOM Models P03632-xx1 SKU Number HPE ProLiant DL360 Gen10 4214 2.2GHz 12-core 1P Model Name 16GB-R P408i-a 8SFF 500W PS Server 8SFF Chassis 4214 (12 cores, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 2nd Generation Intel Xeon Processors Embeddded LOM Models P03631-xx1 SKU Number HPE ProLiant DL360 Gen10 4210 2.2GHz 10-core 1P 16GB-R P408i-a 8SFF 500W PS Server Model Name 8SFF Chassis 4210 (10 core, 2.2 GHz, 85W) Processor One processor Number of Processors With standard heatsink 16 GB RDIMM 2R 2933 MT/s Memory (1x 16 GB) NOTE: Runs at 2400 MT/s due to processor limitation.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 1st Generation Intel Xeon Processors Embedded LOM Model 867963-B21 SKU Number HPE ProLiant DL360 Gen10 Model Name 5118 2.3GHz 12C 105W 2P 32G-2R P408i-a 8SFF 2x800W Performance Server 867964-B21 HPE ProLiant DL360 Gen10 6130 2.1GHz 16C 125W 2P 64G-2R P408i-a Premium 10NVMe 2x800W High Perf Svr Chassis Processor 8SFF 5118 (12-Core, 2.3 GHz, 105W) Premium 10 SFF NVMe 6130 (16-Core, 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 1st Generation Intel Xeon Processors Embedded LOM Models P01880-B21 SKU Number HPE ProLiant DL360 Gen10 Model Name 3104 1.7GHz 6-core 1P 8GB-R S100i 4LFF 500W PS Base Server 4LFF Chassis 3104 (6-Core, 1.7 GHz, 85W) Processor One processor Number of Processors With standard heatsink 8 GB RDIMM 2R 2666 MT/s Memory (1x 8 GB) NOTE: Runs at 2133 MT/s due to processor limitation.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 1st Generation Intel Xeon Processors Embeded LOM Models P06453-xx1 P06454-xx1 P06455-xx1 SKU Number HPE ProLiant DL360 Gen10 4110 HPE ProLiant DL360 Gen10 HPE ProLiant DL360 Gen10 Model Name 2.1GHz 8-core 1P 16GB-R P408i-a 5118 6130 2.1GHz 16-core 1P 64GB-R 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Pre-configured Models Powered by 1st Generation Intel Xeon Processors Embedded LOM Model P05520-xx1 SKU Number HPE ProLiant DL360 Gen10 4110 2.1GHz 8-core 1P 16GB-R P408i-a 8SFF 500W RPS Solution Server Model Name 8SFF Chassis 4110 (8 core, 2.1 GHz, 85W) Processor One processor Number of Processors With standard heatsink 16 GB RDIMM 2R 2666 MT/s Memory (1x 16 GB) NOTE: Runs at 2400 MT/s due to processor limitation.
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information This section lists some of the steps required to configure a Factory Integrated Model. To ensure valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. 1. Factory Integrated Models must start with a CTO Server. 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information CTO Models with embedded LOM CTO Server HPE DL360 Gen10 4LFF CTO HPE DL360 Gen10 8SFF CTO HPE DL360 Gen10 Premium Server Server 10NVMe CTO Svr 867958-B21 867959-B21 867960-B21 SKU Number 875965-B21 875966-B21 875967-B21 TAA SKU* Not included as standard Processor 24-DIMM slots (12 can be used for HPE Persistent Memory) DIMM Slots Embedded SW RAID (S100i) with 14 SATA ports Storage Controller Optional: Choice of HPE modular Smart Array an
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information HPE DL360 Gen10 Intel Xeon-Platinum 8276 (2.2GHz/28-core/165W) FIO Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8276L (2.2GHz/28-core/165W) FIO Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8276M (2.2GHz/28-core/165W) FIO Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8270 (2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information HPE DL360 Gen10 Intel Xeon-Platinum 8160 (2.1GHz/24-core/150W) FIO Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8158 (3.0GHz/12-core/150W) FIO Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8153 (2.0GHz/16-core/125W) FIO Processor Kit 2nd Generation Intel Xeon-Gold HPE DL360 Gen10 Intel Xeon-Gold 6262V (1.
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information HPE DL360 Gen10 Intel Xeon-Gold 6230 (2.1GHz/20-core/125W) FIO Processor Kit HPE DL360 Gen10 Intel Xeon-Gold 6230N (2.3GHz/20-core/125W) FIO Processor Kit HPE DL360 Gen10 Intel Xeon-Gold 6226 (2.7GHz/12-core/125W) FIO Processor Kit HPE DL360 Gen10 Intel Xeon-Gold 6222V (1.8GHz/20-core/115W) FIO Processor Kit HPE DL360 Gen10 Intel Xeon-Gold 6212U (2.4GHz/24-core/165W) FIO Processor Kit NOTE: Ships with High Performance Heatsink.
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information HPE DL360 Gen10 Intel Xeon-Gold 6138 (2.0GHz/20-core/125W) FIO Processor Kit NOTE: Ships with Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Gold 6136 (3.0GHz/12-core/150W) FIO Processor Kit NOTE: Ships with Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Gold 6134M (3.2GHz/8-core/130W) FIO Processor Kit NOTE: Ships with Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Gold 6134 (3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information Step 2b: Choose Memory Options Please select one or more memory from below. For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to: https://www.hpe.com/docs/memory-population-rules For Gen10 memory speed table, please go to: https://www.hpe.
QuickSpecs HPE ProLiant DL360 Gen10 Server Configuration Information HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit NOTE: 1600W Power supplies only support high line voltage (200 VAC to 240 VAC). Step 3: Choose Additional (FIO) Factory Integratable Options Each of the following may be selected if desired at time of factory integration HPE Trusted Platform Module 2.0 Gen10 Option NOTE: HPE Trusted Platform Module 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your local sales representative for additional information. HPE Unique Options Risers HPE DL360 Gen10 Low Profile Riser Kit 867982-B21 HPE DL360 Gen10 SATA M.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options Optical Drive Options HPE Mobile USB DVD-RW Optical Drive NOTE: This kit is supported on USB 3.0 ports only. HPE 9.5mm SATA DVD-ROM Optical Drive HPE 9.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE DL360 Gen10 Intel Xeon-Platinum 8276 (2.2GHz/28-core/165W) Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8276L (2.2GHz/28-core/165W) Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8276M (2.2GHz/28-core/165W) Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8270 (2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE DL360 Gen10 Intel Xeon-Platinum 8160 (2.1GHz/24-core/150W) Processor Kit NOTE: Ships with Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8158 (3.0GHz/12-core/150W) Processor Kit NOTE: Ships with Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Platinum 8153 (2.0GHz/16-core/125W) Processor Kit 2nd Generation Intel Xeon-Gold HPE DL360 Gen10 Intel Xeon-Gold 6262V (1.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE DL360 Gen10 Intel Xeon-Gold 6230N (2.3GHz/20-core/125W) Processor Kit HPE DL360 Gen10 Intel Xeon-Gold 6226 (2.7GHz/12-core/125W) Processor Kit HPE DL360 Gen10 Intel Xeon-Gold 6222V (1.8GHz/20-core/115W) Processor Kit HPE DL360 Gen10 Intel Xeon-Gold 6212U (2.4GHz/24-core/165W) Processor Kit NOTE: Ships with High Performance Heatsink. HPE DL360 Gen10 Intel Xeon-Gold 6210U (2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE DL360 Gen10 Intel Xeon-Gold 6138 (2.0GHz/20-core/125W) Processor Kit NOTE: Ships with Performance Heatsink HPE DL360 Gen10 Intel Xeon-Gold 6136 (3.0GHz/12-core/150W) Processor Kit NOTE: Ships with Performance Heatsink HPE DL360 Gen10 Intel Xeon-Gold 6134M (3.2GHz/8-core/130W) Processor Kit NOTE: Ships with Performance Heatsink HPE DL360 Gen10 Intel Xeon-Gold 6134 (3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE Memory For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to: https://www.hpe.com/docs/memory-population-rules For Gen10 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: http://www.hpe.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD Midline - 12G SAS - LFF Drives HPE 14TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD HPE 12TB SAS 12G Midline 7.2K LFF (3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE 3.84TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty SSD HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Value SAS Digitally Signed Firmware SSD HPE 1.92TB SAS 12G Read Intensive SFF (2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE 3.84TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD HPE 3.84TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD HPE 1.92TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD HPE 1.92TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD HPE 1.92TB NVMe x4 Lanes Read Intensive SFF (2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options Write Intensive- PCIe/NVMe - SFF - Solid State Drives HPE 750GB NVMe x4 Lanes Write Intensive SFF (2.5in) SCN 3yr Wty HPE 375GB NVMe x4 Lanes Write Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD Mixed Use - SATA - SFF - Solid State Drives HPE 3.84TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Multi Vendor SSD HPE 3.84TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD HPE 3.84TB SATA 6G Mixed Use SFF (2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options Hard Drive Blank Kits HPE Large Form Factor Hard Drive Blank Kit HPE Small Form Factor Hard Drive Blank Kit HPE Networking 100 Gigabit Ethernet adapters HPE Ethernet 100Gb 1-port 842QSFP28 Adapter 25 Gigabit Ethernet adapters HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter 10 Gigabit Ethernet adapters HPE Ethernet 10Gb 2-port 562T Adapter HPE Ethernet 10Gb 2-port 5
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options HPE InfiniBand HDR100/Ethernet 100Gb 2-port 940QSFP56 Adapter P06251-B21 HPE InfiniBand HDR100/Ethernet 100Gb 1-port 940QSFP56 Adapter P06250-B21 HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter 764285-B21 HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter 764284-B21 HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter 879482-B21 HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter 872725-B21 HPE InfiniBand EDR/Ethe
QuickSpecs HPE ProLiant DL360 Gen10 Server Core Options GPGPU Information Part Card number Q9B37C Qty supported Processor supported PCIe speed HPE DL360 Configuration 4LFF 8SFF 8+2SFF SAS/ SATA/ Dual M.21 35C 35C <25C 8+2SFF SAS/ SATA/ Dual M.
QuickSpecs HPE ProLiant DL360 Gen10 Server Additional Options Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information.
QuickSpecs HPE ProLiant DL360 Gen10 Server Additional Options HPE Security HPE 1U Gen10 Bezel Kit HPE Bezel Lock Kit HPE DL360 Gen10 Chassis Intrusion Detection Kit NOTE: This provides a physical connection from the chassis board and hood and detects any physical intrusion into the chassis, providing security during the entire supply chain process of shipping, receiving, distribution, and operation. HPE Trusted Platform Module 2.0 Gen10 Option NOTE: HPE Trusted Platform Module 2.
QuickSpecs HPE ProLiant DL360 Gen10 Server Additional Options HPE Cable Options HPE DL360 Gen10 SFF Internal Cable Kit HPE DL3XX Gen10 Rear Serial Cable and Enablement Kit HPE DL360 Gen10 P824i-p Cable Kit NOTE: SFF only, not supported on LFF chassis. HPE DL360 Gen10 LFF Internal Cable Kit NOTE: For additional details and cabling matrix, please see: http://www.hpe.
QuickSpecs HPE ProLiant DL360 Gen10 Server Additional Options NOTE: HPE rail kits contain telescoping rails which allow for in-rack serviceability. NOTE: Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
QuickSpecs HPE ProLiant DL360 Gen10 Server Additional Options Write Intensive - 12G SAS - SFF - Solid State Drive HPE 3.2TB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD Mixed Use - 12G SAS - LFF - Solid State Drives HPE 600GB SAS 12G Enterprise 15K LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware HDD HPE 300GB SAS 12G Enterprise 15K LFF (3.
QuickSpecs HPE ProLiant DL360 Gen10 Server Memory Memory Population guidelines HPE Gen10 DL360 / DL380 / DL560 NOTE:* Servers Front Server2 Slots per Channel 1 DIMM 8 2 DIMM s 8 10 3 DIMM s 8 10 4 DIMM s 3 5 8 10 5 DIMM s 3 5 8 10 6 DIMM s 1 3 5 8 10 7 DIMM s 1 3 5 7 8 10 8 DIMM s 3 4 5 6 7 8 9 10 9 DIMM s 1 3 5 7 8 9 10 11 10 DIMM s 1 3 4 5 6 7 8 9 10 11 DIMM s 1 3 4 5 6 7 8 9 10 11 12 DIMM s 1 2 3 4 5 6 7 8 9 10 11 HPE ProLiant Gen10 12 slot per CPU DIMM population order 12 12 12 12 12 12 12 12 Gener
QuickSpecs HPE ProLiant DL360 Gen10 Server Storage 4 LFF device bay numbering 8 SFF + ODD device bay numbering Item Description 1 Bays 1-8 2 Bays 1 and 2 8 SFF + 2 SFF device bay numbering 10 SFF NVMe/SAS backplane option device bay numbering NOTE: When the 10SFF NVMe/SAS backplane option is installed, bays 9 and 10 ONLY support NVMe Drives.
QuickSpecs HPE ProLiant DL360 Gen10 Server Technical Specifications System Unit Dimensions (Height x Width x Depth) SFF Drives • 4.29 x 43.46 x 70.7 cm • 1.69 x 17.11 x 27.83 in LFF Drives • 4.29 x 43.46 x 74.98 cm • 1.69 x 17.11 x 29.5 in Weight (approximate) 13.04 kg (28.74 lb) 16.27 kg (35.86 lb) 13.77 kg (30.36 lb) 16.78 kg (37 lb) SFF minimum: One drive, one processor, one power supply, two heatsinks, one Smart Array controller, and five fans.
QuickSpecs HPE ProLiant DL360 Gen10 Server Technical Specifications Maximum Peak Power • For 1600W Power Supply: 1600W (at 240 VAC), 1600W (at 240 VDC) for China only • For 800W (Titanium) Power Supply: 800W (at 200 VAC), 800W (at 240 VAC), 800W (at 240 VDC) for China only • For 800W (Platinum) Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VDC) input for China only • For 800W (Universal) Power Supply: 800W (at 200 VAC), 800W (at 277 VAC) • For 800W (-48VDC) Power Supply: 800W (at -40 Vd
QuickSpecs HPE ProLiant DL360 Gen10 Server Technical Specifications Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping configurations.
QuickSpecs HPE ProLiant DL360 Gen10 Server Summary of Changes Date 02-Dec-2019 Version History Action Version 28 Changed Description of Change Overview, Pre-configured Models, Configuration Information, Core Options, Additional Options and Technical Specifications sections were updated. Obolete SKUs were removed Overview, Pre-configured Models, Core Options, and Additional Options sections were updated.
QuickSpecs HPE ProLiant DL360 Gen10 Server Summary of Changes 05-Feb-2018 18-Dec-2017 Version 9 Version 8 Added Changed 04-Dec-2017 Version 7 Changed 23-Oct-2017 Version 6 Changed 16-Oct-2017 Version 5 Changed 25-Sep-2017 Version 4 Changed 14-Aug-2017 07-Aug-2017 Version 3 Version 2 Changed Changed 11-Jul-2017 Version 1 New Added new SATA SSDs, NVMe drives and PCIe accelerator cards. Network controller under Configuration Information – Factory Integrated Models section was revised.