Product Data Sheet / Brochure

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Configuration Information
Page 26
is based not only upon the server family, but may also be affected by the amount and type of additional hardware
options installed within a specific server configuration. For this reason, some HPE memory DIMMs may be qualified
for a server model or family and yet occasionally not be supported with limited configurations within that server
family.
- Please consult with the HPE server Quickspecs or your HPE representative if you have any questions regarding
memory compatibility with a specific HPE server configuration.
Registered DIMMs (RDIMMs)
HPE 16GB (1x16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
P06029-B21
HPE 16GB (1x16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
P06031-B21
HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
P06033-B21
HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
P06035-B21
HPE 8GB (1x8GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
P07525-B21
HPE 32GB (1x32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit
P40007-B21
Notes:
− 3200 MT/s memory SKUs offer a transfer rate of 3200 MT/s at 1 DIMM per channel and at 2 DIMMs per
channel
− Mixing of LRDIMM and RDIMM is not supported
− Mixing of 3DS memory and non-3DS memory is not supported
Load Reduced DIMMs (LRDIMMs)
HPE 128GB (1x128GB) Quad Rank x4 DDR4-3200 CAS-22-22-22 Load Reduced Smart Memory Kit
P06037-B21
HPE 256GB (1x256GB) Octal Rank x4 DDR4-3200 CAS-26-22-22 3DS Load Reduced Smart Memory Kit
P06039-B21
HPE Persistent Memory (Intel Optane)
Intel Optane 128GB persistent memory 200 Series for HPE
P23532-B21
Intel Optane 256GB persistent memory 200 Series for HPE
P23535-B21
Intel Optane 512GB persistent memory 200 Series for HPE
P23538-B21
Notes:
- A maximum of 8 Intel Optane Persistent Memory for HPE supported with 1P 3rd Generation Intel XeonProcessors
- A maximum of 16 Intel Optane Persistent Memory for HPE supported with 2P 3rd Generation Intel Xeon Processors
- Intel Optane persistent memory 200 Series for HPE supported with select 3
rd
Generation Intel Xeon Scalable series
processors ONLY (83xx/63xx/53xx) and can only be mixed with either RDIMMs or LRDIMMs.
- Mixing of different capacity Persistent memory is not allowed. Only one Persistent Memory kit capacity is allowed per
server/configuration. Cannot be selected with any single rank x8 DDR4 3200AA memory kit. (i.e 1Rx8 PC4-3200AA-
R or L).
- This option requires the selection of Maximum Performance Fan Kit (P14608-B21). This note does not apply to
12LFF Model-X or 24SFF Model-X.
- Cannot be selected with HPE 800W FS 48VDC Ht Plg LH Pwr Sply Kit and HPE 1600W FS -48VDC Ht Plg PS Kit.
- Intel Optane Persistent Memory for HPE (PMEM) require either an RDIMM or LRDIMM to be configured. The number of
RDIMMs or LRDIMMs required is based on the processor configuration and number of Intel Optane Persistent Memory for
HPE (PMEM) selected:
o For 1P Configuration:
• -Qty. 1 PMEM requires Qty.= 6 or 8 RDIMMs or LRDIMMs
• -Qty. 2 PMEM requires Qty.= 12 RDIMMs or LRDIMMs
• -Qty. 4 PMEM requires Qty.= 4 or 8 RDIMMs or LRDIMMs
• -Qty. 8 PMEM requires Qty.= 8 RDIMMs or LRDIMMs
o For 2P Configuration:
• -Qty. 2 PMEM requires Qty.= 12 or 16 RDIMMs or LRDIMMs
• -Qty. 4 PMEM requires Qty.= 24 RDIMMs or LRDIMMs
• -Qty. 8 PMEM requires Qty.= 8 or 16 RDIMMs or LRDIMMs
• -Qty. 16 PMEM requires Qty.= 16 RDIMMs or LRDIMMs
- Additional Intel Optane Persistent Memory for HPE(PMEM) cannot be selected beyond the provided configurations above.