ProLiant DL380 Gen10 Plus Server

QuickSpecs
HPE ProLiant DL380 Gen10 Plus Server
Standard Features
Page 10
Notes:
− HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional
controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
− HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
− The S100i uses 14 embedded SATA ports, but only 12 ports are accessible
− The S100i supports Windows only
− Supports up to 2 NVMe drives
− Does not support CM6, CD6, P4xxx, and PE80xx NVMe drives
− For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot
volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/
• Intel® Virtual RAID on CPU (Intel® VROC)
Notes: Requires selection of Second Processor.
Essential RAID Controller
• HPE Smart Array E208i-a SR Gen10 Controller
• HPE Smart Array E208i-p SR Gen10 Controller
• HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controller
• HPE Smart Array P408i-a SR Gen10 Controller
• HPE Smart Array P408i-p SR Gen10 Controller
• HPE Smart Array P408e-p SR Gen10 Controller
• HPE Smart Array P816i-a SR Gen10 Controller
Notes:
− Performance RAID Controllers require the HPE Smart Hybrid Capacitor (P02377-B21) or the HPE Smart Storage
Battery (P01366-B21) which are sold separately.
− For additional details, please see HPE Smart Array Gen10 Controllers Data Sheet.
Tri-Mode Controller
• HPE MR416i-p Gen10 Plus Controller
• HPE MR416i-a Gen10 Plus 12G Controller
• HPE MR216i-p Gen10 Plus 12G Controller
• HPE MR216i-a Gen10 Plus 12G Controller
• HPE SR932i-p Gen10 Plus Controller
Notes:
PE80xx NVMe drives are not supported.
• HPE SR416i-a Gen10 Plus Controller
Notes:
PE80xx NVMe drives are not supported.